Read the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 Exam cost below
The price of Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 exam is $300 USD.
Cisco 200-401 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Install, Replace, and/or Remove an End-Device | 15% | -Demonstrate knowledge of different industrial end-point devices and the interconnections for those devices to perform appropriately in an industrial setting to incorporate elements of bandwidth, real-time, precision, etc. -Given a config script for a topology, determine the appropriate location for the installation of the industrial ruggedized end-point device and how that device will interact with other elements -Ensure proper industrial network operation of a given end-device following replacement by verifying that industrial ruggedized elements (ports, IP address, connectivity, subnet mask, default gateway) are appropriately configured/connected -Demonstrate an understanding of safe physical installation of various industrial ruggedized end-devices within an industrial setting following a terminal block diagram |
| Troubleshooting | 35% | -Layer 1
-Layer 2
- Layer 3
- End to End
-Relevant Networking Issues
|
| Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices | 17% | -Given a scenario, ensure reliable back-ups of current configuration are being made -Given a scenario, verify that the appropriate firmware is loaded to support the system -Demonstrate an understanding of the importance of maintaining updated firmware to minimize security holes -Demonstrate an understanding of appropriate techniques to upload software to a Cisco IOS networking device -Provided a deployed asset inventory database illustrate an understanding of appropriate methods for updating and/or maintaining the database (hardware, operating system and patch level, which people have access to different systems) -Demonstrate an understanding of the conditions that cause deterioration of equipment (cables, devices, etc.) as related to industrial environments -As part of the change management process identify the relevant documentation artifacts to be maintained for all stakeholders |
| Install, Replace, and/or Remove Cables (Network and/or Power) | 10% | -Demonstrate the selection of cable channel for an industrial application with appropriate cable and connectors, for example two-pair, four-pair cable, high-flex, high- EMI, unshielded, fiber, and copper -Demonstrate safe and secure installation, identification, and documentation best practices for various industrial environments including grounding, bonding, shielding, etc. (for example: TIA1005, TIA568c.0, EN10174, TIA606b, and NEC article 800) -Identify the steps and tools for validating the newly installed cabling and connectors (for example: TIA568c.2) |
| Install, Replace, and/or Remove an Infrastructure Device | 23% | -Demonstrate a knowledge of how different industrial application/network protocols operate within the network topology (Ethernet/IP, 61850, etc.) -Demonstrate familiarity with basic CLI/GUI configuration within an industrial network by accessing, configuring, saving, validating (ports, IP address, connectivity, subnet mask, default gateway) and exiting a network device -Demonstrate understanding of safe physical installation of various industrial ruggedized network devices within an industrial setting, (e.g. following a schematic such as a terminal block diagram, and the interdependencies of the network infrastructure devices) -Demonstrate knowledge of different industrial network infrastructure devices, their places in the industrial network, and the networking/device characteristics such as QoS, precise timing, industrial topologies, network resiliency, ruggedization, bandwidth, etc. -Illustrate understanding of the interconnections for the full network within a validation of the entire industrial network connectivity and that it is aligned with the provided design diagram (correct number of devices and/or IP addresses, cables are properly labelled and connected to the proper places, usage of appropriate icons) to include ensuring that configuration files are up to date and available -Illustrate an understanding of the safety and security risks (company or industry, e.g. Purdue model) for a given industrial infrastructure device and apply the appropriate steps to secure it (e.g. are unused ports turned off, telnet versus SSH, https versus http, network segmentation) |
Read the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 Exam formate below
Format: Multiple choices, multiple answers
- Number of questions: 55-65
- Length of Examination: 75 minutes
- Language: English, Japanese
- Passing score: 70%
The most superior 200-401 VCE torrent
It is human nature that everyone wants to enjoy the most superior 200-401 exam dump. We make promises that our exam is the most perfect products. Our workers have made a lot of contributions to update the 200-401 study materials. Once you have studied the material, you will find that the knowledge is clear and complete. Our sales have proved everything. Most people who want to gain the Cisco certificate have bought our products. We are confident to say that our 200-401 VCE torrent is the best one because we have never make customers disappointed. Our workers have tested the 200-401 exam simulator for many times, there must be no problems.
Receiving the 200-401 study materials quickly
In modern society, most people put high emphasizes on efficiency. Once they buy the 200-401 VCE torrent materials, they are looking forward to using it quickly. As for this point, our workers are always online. If they find that you have paid for our exam, our system will send you an email in which includes the 200-401 exam dump at once. Please pay attention to your mailbox in case you miss our emails. We will not let you wait for a long time. If you don't receive our 200-401 study materials in five minutes, please contact with our online worker. We are always efficient and quick.
Read the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 Exam topics below
Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 200-401 exam dumps will include the following topics:
1.0 IP Networking 20% 1.1 Describe the difference between enterprise environments and industrial environments 1.2 Describe the components for making the data flow highly available and predictable in an industrial environment (QoS, IP addressing, protocol, and hardware resiliency) 1.3 Interpret and diagnose problems that are related to QoS 1.4 Describe the differences between redundancy and resiliency requirements / approaches between the enterprise and the plant floor 1.5 Differentiate the capabilities of switch types 1.6 Describe the life cycle of a multicast group 1.7 Describe and configure the operation and use cases for NAT 1.8 Describe and configure the operation and use cases for static routing 1.9 Describe and configure VLAN trunking to a virtual switch 1.10 Describe and configure Layer 2 resiliency protocols (Spanning Tree, REP, Flex Links, and Etherchannels) 1.11 Configure switch ports (macros, threshold alarms) 2.0 Common Industrial Protocol (CIP) Knowledge and Configuration 19% 2.1 Explain the CIP connection establishment process 2.2 Explain producer/consumer models and implicit/explicit message models 2.3 Recognize communication abilities and capacities in different hardware/hardware generations (revisions) 2.4 Identify and describe the technologies that enable CIP Motion and CIP Safety 2.5 Identify the applicability, limitations, and components of a DLR implementation 2.6 Implement multicast features for CIP within a LAN 2.7 Optimize RPI on a CIP connection given a set of parameters 2.8 Enable and configure IEEE 1588 PTP at the system level 2.9 Configure the Stratix using the Add On Profile (AOP) in Studio 5000 2015 Cisco Systems, Inc. This document is Cisco Public. Page 2 3.0 ProfiNET Knowledge and Configuration 19% 3.1 Describe the differences in ProfiNET support between Cisco catalyst and Cisco Industrial Ethernet (IE) switches 3.1.a Support for VLAN 0 3.1.b Support for ProfiNET LLDP 3.1.c Support for GSDs (integration into SIMATIC STEP 7) 3.2 Describe the operation and purpose of ProfiSAFE 3.3 Describe the three basic ProfiNET devices and conformance classes 3.4 Describe the ProfiNET application classes and communication channels 3.5 Describe DCP and how it can be used for IP addressing of devices and configuration pushes 3.6 Describe ring network requirements for ProfiNET 3.7 Enable ProfiNET on the switch 3.8 Enable Layer 2 QoS to ensure ProfiNET is prioritized 3.9 Integrate the Cisco IE Switch in SIMATIC STEP 7 3.10 Configure and monitor ProfiNET alarm profiles on IE switches 4.0 Security 12% 4.1 Describe the defense in-depth approach to securing the industrial zone 4.2 Identify how a security component (hardware/software) applies to a network device to meet the network security definition of defense in depth 4.3 Describe network device hardening 4.4 Describe the concept and mechanisms of implementing logical segmentation 4.5 Identify possible options to control traffic between zones (ACLs, firewalls, VLANs) 5.0 Wireless 10% 5.1 Describe the differences between 802.11a/b/g/n/ac 5.2 Describe the components that you need to build multiple wireless networks on a single access point 5.3 Describe the difference between autonomous and controller-based access points and wireless workgroup bridges 5.4 Demonstrate a typical switchport configuration for autonomous and controller-based access points 5.5 Describe the limitations of using a workgroup bridge with a control communication 6.0 Troubleshooting 20% 6.1 Troubleshoot advanced Layer 1 problems such as mechanical deterioration, electromagnetic noise issues, and infrastructure mismatches 2015 Cisco Systems, Inc. This document is Cisco Public. Page 3 6.2 Troubleshoot VLAN trunking 6.3 Troubleshoot an error disabled port 6.4 Troubleshoot basic spanning tree port state and root priority problems 6.5 Troubleshoot Layer 3 problems by inspecting route tables and NAT tables 6.6 Troubleshoot Layer 3 problems in a VRF-lite enabled environment 6.7 Demonstrate the ability to find the location of a device within a multi-switch network given an IP address 6.8 Identify methods for troubleshooting a communication problem in a CIP environment 6.9 Troubleshoot CIP using an Ethernet/IP browse tool, command line, and a web browser 6.10 Troubleshoot device communications performance 6.11 Identify the source of cable and device faults in a DLR 6.12 Identify methods for troubleshooting a communication problem in a ProfiNET environment 6.13 Troubleshoot ProfiNET using SIMATIC STEP 7 to view network topology, use the switch command line
Do you have an enormous work pressure? Do you work overtime and have no overtime pay? You must be fed up with such kind of job. Our Cisco 200-401 exam will offer you a chance to change your current situation. We know that you are looking forward to high salary, great benefits, lots of time off, and opportunity for promotion.
Most people dream of becoming an Cisco worker. Is it difficult to pass the exam? The answer is no because our 200-401 VCE torrent files are the greatest learning material in the world. If you have tried, you will feel lucky to come across our products. Never can you find such fantastic 200-401 exam dump in other company because we have the best and most professional workers. As old saying goes, sharp sword from the sharpening out, plum blossom incense from the cold weather. If you want to enter the higher class, our Cisco 200-401 exam is the best choice. Let's fight together.
Reasonable prices for the 200-401 exam dump
When we buy 200-401 VCE torrent, two things are the most important. The first is prices and the second is quality. Our company has succeeded in doing the two aspects. The price for our exam is under market's standard. Our Cisco 200-401 study materials have the most favorable prices. You can never find such low prices in the network. At the same time, our prices are not always invariable. Every once in a while, our 200-401 exam dump will has promotions activities for thanking our old customers and attracting new customers. If you are old customers of our company, you can enjoy more discounts for the 200-401 VCE torrent during our activities. Please pay close attention to our products.
Instant Download: Our system will send you the 200-401 braindumps files you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Suzanne 
Quintina 
Hardy 
Elsie 
Hiram 
Magee 
Barton 
Leo 
Primo 
Kerwin 
Larry 
Herbert 
Leo 
Norton 
Julie 
Octavia 
Malcolm 
Tabitha 
Kyle 
