Best Preparations of 3V0-42.20 Exam 2021 VCAP-NV Design 2020 Unlimited 58 Questions
Focus on 3V0-42.20 All-in-One Exam Guide For Quick Preparation.
Salary of Advanced Design VMware NSX-T Data Center 3.0 certified professionals
The salary of Advanced Design VMware NSX-T Data Center 3.0 certified professionals varies from $75K to $120K depending on the years of experience.
NEW QUESTION 34
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
The company will use a Leaf and Spine physical network architecture with Layer 3 gateways for top of rack switches.
The company is planning to deploy 120 ESX hosts across 10 racks.
There will be a total of a 12 clusters where each cluster has one host per rack.
What should the architect recommend to allow applications to run on any host in the cluster? (Choose the best answer.)
- A. Deploy a Tier-0 gateway per Rack and configure BGP between racks.
- B. Deploy an L2 VPN to allow the networks to extend to each host.
- C. Deploy a Tier-1 gateway per Rack and configure BGP between racks.
- D. Deploy all application networks on NSX segments.
Answer: C
NEW QUESTION 35
An architect is helping an organization with the Logical Design of a Layer 2 bridging solution.
This information was gathered during the Assessment Phase:
Workloads are running on ESXi hosts.
Workloads are running on KVM hosts.
Workloads on hypervisors should use bridging services.
VLAN 50 is used for Tier-0 uplink connectivity.
Which selection should the architect include in their design? (Choose the best answer.)
- A. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 50.
- B. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 60.
- C. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 50.
- D. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 60.
Answer: C
NEW QUESTION 36
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Customer is concerned with NSX Manager availability.
3 cabinets/racks are available in the data center.
No integration with 3rd party solution is required.
There is no budget for physical equipment acquisition.
The 3 cabinets/racks do not share the same L2 domain.
Which three selections should the architect include in their design to address the customer's concern with NSX Manager availability? (Choose three.)
- A. Use separate IP per NSX Manager appliance per rack.
- B. Deploy an NSX Manager Appliance per rack and cluster them.
- C. Use a physical/internal load-balancer with the cluster.
- D. Deploy a single active NSX Manager appliance in rack 1.
- E. Use another NSX Manager IP in case an appliance fails.
- F. Deploy 2 cold standby NSX Manager appliances in rack 2/3.
Answer: B,D,F
NEW QUESTION 37
Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node?
(Choose two.)
- A. Reduces storage requirements.
- B. Preserves packet locality.
- C. Preserves switchports.
- D. Reduces cost.
- E. Reduces egress data.
Answer: D,E
NEW QUESTION 38
A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with these requirements:
identity platform must be highly available
authentication must be performed by customer's existing SAML identity provider MFA must be performed by administrator to gain access to NSX Manager Which identity deployments would meet the customer's requirements? (Choose the best answer.)
- A. NSX Manager OAuth 2.0 registered to a 3-node VMware Identity Manager cluster.
- B. NSX Manager OAuth 2.0 registered to a 2-node VMware Identity Manager cluster.
- C. NSX Manager OAuth 2.0 registered to a 3-node Active Directory Federation Services cluster.
- D. NSX Manager OAuth 2.0 registered to a 2-node Active Directory Federation Services cluster
Answer: A
NEW QUESTION 39
An administrator is asked to improve Recovery Point Objective (RPO) and Recovery Time Objective (RTO) for Disaster Recovery (DR) in their company network. The network has a primary site and a secondary site. The ability to support outages with minimum loss of connectivity to the company's core application is a priority.
Which design should the administrator recommend? (Choose the best answer.)
- A. NSX-T Data Center using built-in standard automation DR and secondary site recovery setup.
- B. NSX-T Data Center using Federation and dependencies set between primary and secondary sites.
- C. NSX-T Data Center using a registered third-party DR solution.
- D. NSX-T Data Center using an Orchestrator to recover VMs across sites.
Answer: B
NEW QUESTION 40
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
There are applications which use IPv6 addressing.
Network administrators are not familiar with NSX-T Data Center solutions.
Hosts can only be configured with two physical NICs.
There is an existing management cluster to deploy the NSX-T components.
Dynamic routing should be configured between the physical and virtual network.
There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)
- A. Network administrators are not familiar with NSX-T Data Center solutions.
- B. There is a storage array available to deploy NSX-T components.
- C. There are applications which use IPv6 addressing.
- D. Dynamic routing should be configured between the physical and virtual network.
Answer: D
NEW QUESTION 41
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Some workloads should be moved to a Cloud Provider.
Extend network's VLAN or VNI across sites on the same broadcast domain.
Enable VM mobility use cases such as migration and disaster recovery without IP address changes.
Support 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)
- A. Reflexive NAT
- B. Load Balancer
- C. SSL VPN
- D. L2 VPN
Answer: D
NEW QUESTION 42
According to the Discover Task of the Engagement Lifecycle, which statement would be classified as a risk? (Choose the best answer.)
- A. A merger and acquisition process was recently completed and new company on-boarding is not completed.
- B. To retain certification to provide financial services to end customers, PCI-DSS audits need to be passed.
- C. Due to existing contracts and purchase agreements, the existing server hardware needs to be reused.
- D. Enough power and cooling capacity is available in each rack in the data center.
Answer: B
NEW QUESTION 43
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
There are applications which use IPv6 addressing.
Network administrators are not familiar with NSX-T Data Center solutions.
Hosts can only be configured with two physical NICs.
There is an existing management cluster to deploy the NSX-T components.
Dynamic routing should be configured between the physical and virtual network.
There is a storage array available to deploy NSX-T components.
Which two requirements were documented by the architect? (Choose two.)
- A. The storage array has enough capacity to deploy NSX components.
- B. Hosts can only be configured with two physical NICs.
- C. Network administrators are not familiar with NSX-T Data Center solutions.
- D. There are applications which use IPv6 addressing.
- E. Dynamic routing should be configured between the physical and virtual network.
Answer: A,E
NEW QUESTION 44
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
* Current hypervisor of choice is KVM.
* Cost reduction is important.
Which two selections should the architect recommend to the organization? (Choose two.)
- A. Deploy Edge VM Nodes using ISO.
- B. Deploy NSX Manager using QCOW2.
- C. Deploy bare metal Edge Nodes.
- D. Deploy NSX Manager using OVF.
- E. Deploy Edge VM Nodes on KVM.
Answer: B,C
Explanation:
Explanation/Reference:
NEW QUESTION 45
Refer to the exhibits.
Design Option1:
Design Option 2:
Design Option 3:
Design Option 4:
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
Critical applications must run across sites without changing IP address.
Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
RTO/RPO must be reduced for recovery of applications on secondary site.
IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)
- A. Design Option 2
- B. Design Option 4
- C. Design Option 3
- D. Design Option 1
Answer: D
NEW QUESTION 46
An NSX-T architect is working with a customer who wants to improve performance and future-proof their workloads with a multi-site architecture.
A current-state analysis captured this information:
Latency between sites is 160ms.
Bandwidth is 2Gbps.
The MTU is 1600.
What two VMware design recommendations should the architect recommend to the organization to achieve future-proofing? (Choose two.)
- A. Latency must be less than 150ms.
- B. Latency RTT is acceptable.
- C. MTU is recommended to be 9000.
- D. Bandwidth must be at least 10Gbps.
- E. MTU must be at least 1700.
Answer: A,C
NEW QUESTION 47
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Current hypervisor of choice is KVM.
Cost reduction is important.
Which two selections should the architect recommend to the organization? (Choose two.)
- A. Deploy Edge VM Nodes using ISO.
- B. Deploy NSX Manager using QCOW2.
- C. Deploy bare metal Edge Nodes.
- D. Deploy NSX Manager using OVF.
- E. Deploy Edge VM Nodes on KVM.
Answer: B,C
NEW QUESTION 48
A customer has a requirement to implement a next generation firewall (NGFW) to improve security network introspection. The customer wants to apply the NGFW to all workloads exposed both internally and externally.
The customer wants the NGFW to work seamlessly with NSX-T Data Center and vSphere.
Which solution should be recommended to the customer? (Choose the best answer.)
- A. Use network introspection only on the external workloads and use NSX DFW for internal workloads.
- B. Apply the NGFW on bare metal hosts which will offer better performance of inline network introspection.
- C. Apply the NGFW to internal and external workloads for increased protection and use NSX-T Data Center with Federation to set network policies.
- D. Use NSX-T Data Center leveraged with NSX Intelligence to protect all workloads at the network inspection level.
Answer: D
NEW QUESTION 49
Which three choices are part of a Design Approach when discussing design alternatives and their effects?
(Choose three.)
- A. security
- B. backup
- C. budget
- D. knowledge
- E. cost
- F. performance
Answer: A,D,F
NEW QUESTION 50
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
Which risk is documented by an architect? (Choose the best answer.)
- A. Open communication between different application tiers is not allowed.
- B. The security team has a firewall communication matrix documented.
- C. Aggregate N-S throughput at any given time should be at least 10G.
- D. The team is not trained for NSX-T but have a very strong experience with vSphere.
Answer: D
NEW QUESTION 51
An architect is designing a solution for containerization. The solution will include high availability and security using NSX-T Data Center. The architect plans to provide a basic required components list in the Logical Design.
Which solution should the architect recommend? (Choose the best answer.)
- A. 3 NSX Managers, 3 virtual NSX Edges, one Tier-0 gateway and a static route and OSPF
- B. 3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
- C. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route
- D. 1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways in Active/Active, BGP configuration
Answer: B
NEW QUESTION 52
Which is a family of solutions for data center designs that span compute, storage, networking, and management, serving as a blueprint for a customer's Software Defined Data Center (SDDC) implementations? (Choose the best answer.)
- A. VMware POC Design
- B. VMware Validated Design
- C. VMware Cloud Foundation
- D. VMware SDDC Design
Answer: B
NEW QUESTION 53
Which type of design includes vendor models, host names, IP Addresses, port connections, logical unit number sizes, and number of CPUs? (Choose the best answer.)
- A. Conceptual Design
- B. Logical Design
- C. High-Level Design
- D. Physical Design
Answer: D
NEW QUESTION 54
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Data between two networks connected over a public network needs to be encrypted.
Certificate authentication is required.
Dynamic route learning is preferred.
Which selection should the architect include in their design? (Choose the best answer.)
- A. Deploy a Tier-0 gateway in Active/Standby mode. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
- B. Deploy a Tier-0 gateway in Active/Standby mode. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
- C. Deploy a Tier-0 gateway in Active/Active mode. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
- D. Deploy a Tier-0 gateway in Active/Active mode. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
Answer: B
NEW QUESTION 55
A Solutions Architect is assisting a service provider with designing an NSX-T Data Center solution for these environments:
Virtual Data Center to Virtual Data Center connectivity
Tenant workload on-boarding to Virtual Data Centers.
These requirements must be met:
scalability across 5 data centers
all sites have a latency of 180ms
MTU between sites is 1800
bandwidth is 100Mbps between sites
multi-tenancy
Which two selections should the Solutions Architect propose to the service provider? (Choose two.)
- A. Configure Remote TEPs for stretching network services between Virtual Data Centers.
- B. Configure IPSec VPN for Tenant T0 gateways for Virtual Data Centers connectivity
- C. Configure IPSec VPN for Tenant T1 gateways for Virtual Data Centers connectivity.
- D. Utilize SSL VPN for workloads on-boarding from on-premises to Virtual Data Centers.
- E. Utilize L2 VPN for workloads on-boarding from on-premises to Virtual Data Centers.
Answer: C,E
NEW QUESTION 56
......
Difficulty in Attempting Advanced Design VMware NSX-T Data Center 3.0
Studying and using the VMWARE 3V0-42.20 dumps pdf can help you with the preparation of the exam. One of the most important certifications that applicants may have on their resume is Advanced Design VMware NSX-T Data Center 3.0 certified. One of the key problems faced by most candidates is to choose the right research materials for their exam preparation since they use the internet to find too much data that makes it difficult for them to trust, which would be helpful for them.
Advanced Design NSX-T Data Center 3.0 Exam is not an easier one and can turn out to be a very difficult certification if not well prepared. If professionals study 3V0-41.20 dumps and test them on test engines, they may take different practice exams while remaining focused on studies.
Applicants may, however, clear the exam with the right concentration and the right preparation material. TorrentExam have the most up-to-date VMWARE 3V0-41.20 practice tests, having a fair understanding of the question trend being asked in real certification with the help of these VMWARE 3V0-41.20 dumps aspirants.
For all of the changes in the course, the experts check TorrentExam VMWARE 3V0-41.20 dumps. TorrentExam also include practise testing, which proves to be an outstanding forum for testing the information gained. Refer to the links down below to access the study materials.
Guaranteed Success with 3V0-42.20 Dumps: https://www.torrentexam.com/3V0-42.20-exam-latest-torrent.html
Pass VMware 3V0-42.20 Exam – Experts Are Here To Help You: https://drive.google.com/open?id=1aRtXLP42R6VCMG3jgUA0zhIXlHnUG5oi
