[Dec-2023] 100% Actual 500-220 dumps Q&As with Explanations Verified & Correct Answers
500-220 Dumps with Free 365 Days Update Fast Exam Updates
Cisco 500-220 certification exam focuses on testing the skills of individuals in designing, deploying, and managing Cisco Meraki cloud-based solutions. 500-220 exam is designed to test the candidate's knowledge of Cisco Meraki products and solutions, including wireless, switching, security, and enterprise mobility management. 500-220 exam is a comprehensive test of the candidates' skills in deploying and managing Cisco Meraki products.
NEW QUESTION # 19
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring a syslog server for the network.
- B. Configuring the preserved event period to unlimited.
- C. Configuring the preserved event number to maximize logging.
- D. Configuring Dashboard logging to preserve only certain event types.
Answer: A
Explanation:
Explanation
Configuring a syslog server for the network is the Cisco Meraki best practice method to preserve complete historical network event logs. A syslog server can be configured to store messages for reporting purposes from MX Security Appliances, MR Access Points, and MS switches1. The syslog server can collect various types of events, such as VPN connectivity, uplink connectivity, DHCP leases, firewall rules, IDS alerts, and security events2. The syslog server can also help with troubleshooting and monitoring the network performance and security.
NEW QUESTION # 20
Refer to the exhibit.
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links?
(Choose two.)
- A. Change the primary uplink to "none".
- B. Set the speed of the cellular uplink to zero.
- C. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
- D. Enable load balancing.
- E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
Answer: D,E
Explanation:
Explanation
To clarify, to optimize load balancing asymmetrically with a 4:1 ratio between links, two actions that are required are:
Enable load balancing: This option allows the MX to use both of its uplinks for load balancing. When load balancing is enabled under Security & SD-WAN > Configure > SD-WAN & Traffic shaping, traffic flows will be distributed between the two uplinks proportional to the WAN 1 and WAN 2 bandwidths specified under Uplink configuration1.
Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1: The assigned speed of a WAN link is a value that indicates the bandwidth available on that link. By changing the assigned speeds of WAN 1 and WAN 2 so that they reflect the desired load-balancing ratio, the administrator can ensure that the MX uses both links efficiently and proportionally1. For example, if WAN 1 has a bandwidth of 100 Mbps and WAN 2 has a bandwidth of 25 Mbps, then setting their assigned speeds to
100 Mbps and 25 Mbps respectively will achieve a 4:1 load-balancing ratio.
NEW QUESTION # 21
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Bridge mode
- B. Dual band operating with Band Steering
- C. Content filtering
- D. 802.11r
Answer: B
NEW QUESTION # 22
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs immediately stop functioning.
- B. All network devices stop functioning in 30 days.
- C. All APs stop functioning in 30 days.
- D. One AP Immediately stops functioning.
Answer: B
NEW QUESTION # 23
Which information is used to calculate whether a WAN link has high usage?
- A. total historical throughput of an uplink
- B. data under Security & SD WAN > Appliance Status > Uplink > Live Data
- C. total number of devices that are actively passing traffic
- D. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
Answer: D
Explanation:
Explanation
Which information is used to calculate whether a WAN link has high usage not how to view (To accurately identify high utilization, users must set the ISP-provided bandwidth limits under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Configuration for each uplink. If the bandwidth usage is higher than
80% of the defined limit, it will mark that uplink as High Usage.)
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=To%20accurately%20identify%20high%20util
NEW QUESTION # 24
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Bridge mode
- B. Dual band operating with Band Steering
- C. Content filtering
- D. 802.11r
Answer: B
Explanation:
Explanation
When band steering is enabled on an SSID, APs will stop advertising that SSID in 2.4GHz beacons. Since
2.4GHz-only clients that rely on a passive scan will not "see" that SSID in beacons, they might not be able to join this SSID unless they do an active scan or have been pre-configured with the SSID name and security settings (for example, a pre-shared key).
https://documentation.meraki.com/MR/Radio_Settings/Band_Steering
NEW QUESTION # 25
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Selective wipe
- B. Send notification
- C. Screenshot
- D. OS updates
- E. Remote Desktop
Answer: A,E
NEW QUESTION # 26
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. installing an SSD memory extension
- B. enabling maximum retention limit
- C. enabling audio compression
- D. enabling motion-based retention
- E. configuring a recording schedule
Answer: D,E
Explanation:
Explanation
https://documentation.meraki.com/MV/Advanced_Configuration/Scheduled_Recording By default, the Meraki security camera's will record continuously 24/7. In some situations, certain times of day are not allowed to be recorded. Scheduled recording covers this requirement as well as improve the video retention capabilities of the camera.
NEW QUESTION # 27
Refer to the exhibit.
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
- A. Change the primary uplink to "none".
- B. Set the speed of the cellular uplink to zero.
- C. Enable load balancing.
- D. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
- E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
Answer: C,D
NEW QUESTION # 28
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
Explanation
The settings that will be cloned using the Cisco Meraki MS switch cloning feature are:
port name
interface type
STP bridge property
The settings that will not be cloned using the Cisco Meraki MS switch cloning feature are:
switch management IP
switch name
NEW QUESTION # 29
Refer to the exhibit.
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
- A. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
- B. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
- C. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
- D. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
Answer: B
Explanation:
Explanation
The performance probe is a small payload (approximately 100 bytes) of UDP data sent over all established VPN tunnels every 1 second. MX appliances track the rate of successful responses and the time that elapses before receiving a response. This data allows the MX to determine the packet loss, latency, and jitter over each VPN tunnel in order to make the necessary performance-based decisions.
https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best
NEW QUESTION # 30
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. privacy window
- B. area or interest
- C. sensor crop
- D. zone exclusion
- E. restricted mode
Answer: E
NEW QUESTION # 31
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. highest VLAN ID that is configured and set to YES to use VPN
- B. highest VLAN ID that is configured and set to NO to use VPN
- C. lowest VLAN ID configured and set to NO to use VPN
- D. lowest VLAN ID that is configured and set to YES to use VPN
Answer: A
Explanation:
Explanation
See Behavior - Firmware MX 15.11 or Lower section For MXs running firmware MX15.11 or below, the source IP that MX uses while pinging a destination is the MX IP of highest VLAN ID. If the destination is across a VPN, the MX uses the MX IP of highest VLAN ID participating in VPN. For MXs running firmware MX 15.12+, additional ping options have been added to the live tool. The ping tool now has a drop down to select the source IP address for pinging destinations from the MX.
https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Ping_Live_T
NEW QUESTION # 32
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- B. Peers contact the VPN registry at TCP port 9350.
- C. Peers contact the VPN registry at UDP port 9350.
- D. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- E. For IPsec tunneling, peers use UDP ports 500 and 4500.
Answer: C,D
Explanation:
Explanation
Ports used to contact the VPN registry:
- Source UDP port range 32768-61000
- Destination UDP port 9350 or UDP port 9351
Ports used for IPsec tunneling:
- Source UDP port range 32768-61000
- Destination UDP port range 32768-61000
https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_-_Configuration_and_Troubleshoo
NEW QUESTION # 33
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs content filtering for inter-VLAN traffic.
- B. The MX appliance performs AMP for inter-VLAN traffic.
- C. The MX appliance performs IDS/IPS for inter-VLAN traffic.
- D. The MX appliance performs data encryption for inter-VLAN traffic.
Answer: D
NEW QUESTION # 34
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Screenshot
- B. Send notification
- C. OS updates
- D. Selective wipe
- E. Remote Desktop
Answer: A,E
Explanation:
Explanation
https://documentation.meraki.com/SM/Monitoring_and_Reporting/MDM_Commands_in_Systems_Manager - Under Live Tools Selective Wiping is only for MacOS. Here we have Windows Laptop as well
NEW QUESTION # 35
......
Cisco 500-220 certification exam covers a range of topics related to Cisco Meraki solutions, including wireless LAN, security, switching, and routing. 500-220 exam is conducted online and consists of 60-70 multiple-choice questions. The duration of the exam is 90 minutes, and the passing score is 70%. 500-220 exam is available in English and Japanese, and the registration fee is $300.
Verified 500-220 dumps Q&As - 2023 Latest 500-220 Download: https://www.torrentexam.com/500-220-exam-latest-torrent.html
Dumps Questions [2023] Pass for 500-220 Exam: https://drive.google.com/open?id=12EAb_J9ZkMWjDtSEoRuqj-tpGaJETA4z
