Get 100% Success with Latest PDI+ PD1-001 Exam Dumps Oct 04, 2022
The Best PD1-001 Exam Study Material and Preparation Test Question Dumps
NEW QUESTION 505
If a technician wants a device to keep the same manually assigned IP address, which of the following should be disabled on the device?
- A. RARP
- B. DHCP
- C. TCP/IP
- D. APIPA
Answer: B
NEW QUESTION 506
The latent image is created on the photoconductor by which of the following?
- A. Laser unit
- B. Transfer unit
- C. Scanner unit
- D. Fusing unit
Answer: A
NEW QUESTION 507
Which of the following would be the corresponding subtractive colors to the additive primary colors?
- A. Orange, Cyan and Blue
- B. Purple, Black and Red
- C. Cyan, Magenta and Yellow
- D. Magenta, Yellow and Black
Answer: C
NEW QUESTION 508
The fuser unit is powered by which of the following components?
- A. USB
- B. HVPS
- C. SCSI
- D. AC PWB
Answer: D
NEW QUESTION 509
A customer wants to print a large graphic image on a smal er sized media. Which of the following printer driver options should the technician recommend?
- A. Media settings
- B. Finishing options
- C. Duplex printing
- D. Scaling
Answer: D
NEW QUESTION 510
Which of the following components is used to detect if a machine cover or door is closed?
- A. Motor
- B. Switch
- C. Clutch
- D. Solenoid
Answer: B
NEW QUESTION 511
A customer is concerned about excessive media jamming in their device. Which of the following is the FIRST thing a technician should check?
- A. Fusing section
- B. Device log data
- C. Cassette drawers
- D. Media feed rollers
Answer: B
NEW QUESTION 512
Which of the following has the LEAST effect on color perception of a color print?
- A. The type of light bulbs in the customers office
- B. The amount of sunlight entering the customers office
- C. The media type the customer uses to print on
- D. The font type used in the customers documents
Answer: D
NEW QUESTION 513
Which of the following components is MOST likely to require lubrication?
- A. Plastic levers
- B. Nylon Belts
- C. Metal Gears
- D. Rubber rollers
Answer: C
NEW QUESTION 514
Which of the following copy defects would result from black spots on the exposure glass when using the flatbed scanner?
- A. Overall light copy quality
- B. Overall dark copy quality
- C. White spots on the copy
- D. Black spots on the copy
Answer: D
NEW QUESTION 515
When scanning in color which of the following model is being utilized?
- A. CMYK
- B. Subtractive
- C. Mono
- D. RGB
Answer: D
NEW QUESTION 516
Before leaving a printer inoperative at a customers site, the FIRST thing a technician should do is:
- A. remove the fuser unit from the printer.
- B. inform the customer of the printers condition.
- C. fil out the printers service history.
- D. put a lockout device on the power plug.
Answer: B
NEW QUESTION 517
Due to traffic a technician has arrived late to their first call, and has three other calls to do that day.
Which of the following is the BEST action to take?
- A. Cal the other three customers and advise of the delays.
- B. Call dispatch and have them reschedule the other clients for later in the week.
- C. Rush through the first call and then to the next call as soon as possible.
- D. One call at a time, they will wait. The other customers wil understand.
Answer: A
NEW QUESTION 518
To begin the troubleshooting process on a color laser printer with poor output image quality, the technician should FIRST:
- A. adjust the fuser temperature settings in NVRAM.
- B. print internal test pages for each primary color.
- C. replace the feed rollers.
- D. replace all four toner cartridges.
Answer: B
NEW QUESTION 519
Fiber optic cables are used to:
- A. transmit light.
- B. transmit voltages.
- C. ground.
- D. test AC voltages.
Answer: A
NEW QUESTION 520
Which of the following is a reason black toner is used in color printers?
- A. It makes the color toner resistant to smudging when wet.
- B. It prevents moir patterns when printing color photographs.
- C. It decreases the print speed in color laser printers.
- D. It reduces the cost per page when printing gray scale documents.
Answer: D
NEW QUESTION 521
A technician has removed the halogen heating lamp from the fusing unit. Which of the following sections of a multimeter would a technician use to test whether the lamps heating element is broken?
- A. DC volt meter
- B. Ammeter
- C. Temperature probe
- D. Ohm meter
Answer: D
NEW QUESTION 522
A client is printing a document they have received from one of their vendors on a LAN printing device. The document prints in landscape even though the printer is hard set to portrait mode and other documents print portrait. Which of the following could be the problem?
- A. The print driver on their system is defaulting to landscape mode for that particular application.
- B. The print queue is set to landscape as default.
- C. The page setup associated with the document in the application is set to landscape.
- D. The printers local defaults are set to landscape mode.
Answer: C
NEW QUESTION 523
When entering a customers location which has a receptionist, the FIRST step a technician should take is:
- A. use appropriate introduction.
- B. ask where the problem device is.
- C. go to the end user.
- D. proceed to the device to start troubleshooting.
Answer: A
NEW QUESTION 524
Which of the following multimeter settings should be used to measure the exposure lamp for continuity?
- A. DC voltage
- B. Diode check
- C. AC voltage
- D. Resistance
Answer: D
NEW QUESTION 525
In the scanner section, after light has passed to the CCD assembly, the next stage is:
- A. analog to digital conversion.
- B. image processing.
- C. white level correction process.
- D. automatic exposure correction.
Answer: A
NEW QUESTION 526
......
Get Ready to Pass the PD1-001 exam Right Now Using Our PDI+ Exam Package: https://www.torrentexam.com/PD1-001-exam-latest-torrent.html
