Achive your Success with Latest Nutanix NCP-MCI-6.5 Exam [Jul 30, 2023]
The NCP-MCI-6.5 Exam Test For Brief Preparation
NEW QUESTION # 63
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. Change the network the VMs are connected to
- B. Update the switch to specifically allow VLAN 15
- C. Change the spanning-tree port type on the switch.
- D. The VMs need to have static IP addresses.
Answer: B
NEW QUESTION # 64
How should an administrator enable secure access to Volumes using a password?
- A. iSER
- B. LDAP
- C. SAML
- D. CHAP
Answer: D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services- Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.
NEW QUESTION # 65
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)
- A. Use acli
- B. Log in over PE web UI.
- C. SSH to CVM.
- D. Update VM dialog.
Answer: A,C
NEW QUESTION # 66
Prism Central will be installed manually on an AHV cluster.
Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)
- A. var
- B. home
- C. data
- D. boot
- E. tmp
Answer: B,C,D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-pc-install-sc
NEW QUESTION # 67
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: D
NEW QUESTION # 68
What is the minimum time a newly created Deduplication storage policy takes to apply to the VMs in the container?
- A. 5 Minutes
- B. 60 minutes
- C. 10 minutes
- D. 30 minutes
Answer: D
NEW QUESTION # 69
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)
- A. Use acli
- B. Log in over PE web UI.
- C. SSH to CVM.
- D. Update VM dialog.
Answer: A,C
Explanation:
Explanation/Reference:
Reference:
#sthash.3uIAHeXZ.dpbs
NEW QUESTION # 70
An administrator needs to configure Prism to send encrypted messages to a set of recipients.
Which setting must be applied?
- A. Set SMTP Security Mode to STARTTLS
- B. Use SMTP Port 25
- C. Configure Prism Central to use Cluster Lockdown
- D. Install SSL certificates on Prism Central
Answer: A
Explanation:
Explanation
The best way for the administrator to configure Prism to send encrypted messages to a set of recipients is to set the SMTP Security Mode to STARTTLS. This will ensure that all messages sent over SMTP are encrypted and secure. Additionally, the administrator should consider installing SSL certificates on Prism Central to ensure that the messages are being sent securely. Finally, the administrator should consider configuring Prism Central to use Cluster Lockdown, which will help ensure that the messages are only sent to the intended recipients.
NEW QUESTION # 71
AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.
At which two instances does the address release back to the pool? (Choose two)
- A. The IP address lease expires
- B. The VM is deleted.
- C. The IP address is changed to static.
- D. The VM NIC is deleted.
Answer: B,D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/solutions/details/?targetId=BP-2029_AHV:BP-2029_AHV Administrators can use Acropolis with IPAM to deliver a complete virtualization deployment, including network management, from the unified Prism interface. This capability radically simplifies the traditionally complex network management associated with provisioning VMs and assigning network addresses. To avoid address overlap, be sure to work with your network team to reserve a range of addresses for VMs before enabling the IPAM feature.
The Acropolis master assigns an IP address from the address pool when creating a managed VM NIC; the address releases back to the pool when the VM NIC or VM is deleted.
NEW QUESTION # 72
After configuring Active Directory as the desired authentication service, an administrator is not able to login into Prism Central using privileged account.
Which configuration must be checked first?
- A. Local user account
- B. Account lock status
- C. Role Mapping
- D. Cluster Lockdown
Answer: C
Explanation:
According to the Nutanix Community1, users can authenticate using their Active Directory credentials when Active Directory support is enabled for Prism Central. To enable Active Directory support, you need to configure Role Mapping12, which defines how Active Directory groups map to Prism Central roles.
https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/configuring-authentication-38051
NEW QUESTION # 73
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)
- A. Use shared nothing live migration.
- B. Import the .vmdk into the Image Service.
- C. Use Cross-Hypervisor DR.
- D. Deploy the Move appliance.
Answer: C,D
NEW QUESTION # 74
Refer to the exhibit.
Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)
- A. BIOS password changes
- B. Host password changes
- C. CVM password changes
- D. Password policy changes
Answer: B,C
NEW QUESTION # 75
Which two permission assignment tasks can be accomplished via Prism Element? (Choose two.)
- A. Grant a user permission to create VMs on a specific storage container
- B. Grant an active directory group permission to perform back operations
- C. Grant a user permission to view details of all VMs on a specific cluster
- D. Grant a user permission to create and delete snapshots on a specific VM
Answer: A,D
Explanation:
Explanation
The two permission assignment tasks that can be accomplished via Prism Element are A. Grant a user permission to create VMs on a specific storage container and D. Grant a user permission to create and delete snapshots on a specific VM. With Prism Element, administrators can assign permissions to users and groups on a per-cluster, per-VM, or per-storage container basis. This allows them to control who can access which resources and perform which operations.
NEW QUESTION # 76
How should an administrator configure a custom alert for a specific VM in Prism?
- A. Modify an existing alert to only alert on the specific VM.
- B. Modify the alerts to add a new custom alert policy.
- C. Modify node settings to add the custom alert.
- D. Modify VM settings to add the custom alert.
Answer: B
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v510:mul-alert-policies-user-defined-configure-pc-c.html
NEW QUESTION # 77
After running an LCM inventory it is noticed that there are a number of firmware and software updates available. The administrator would like to avoid any host reboots, but would like to apply some of the available updates?
Which two updates can be done while avoiding a host reboot? (Choose two.)
- A. AOS
- B. AHV
- C. Data Drives
- D. M.2 Drives
Answer: A,D
Explanation:
AOS and M.2 Drives are two updates that can be done while avoiding a host reboot. AOS is the Acropolis Operating System that includes the hypervisor, storage and management components of the Nutanix cluster, and firmware and software updates can also be applied to it without requiring any host reboots
NEW QUESTION # 78
An administrator is performing validation testing of a new-deploy cluster. During this test, the administrator disconnect each LAN interface from each of the nodes while pinging the hypervisor and guest VMs.
When the first interface is disconnected, pings continue as expected to the hypervisor, but pings stop responding from the guest. Pings continue when the interface is reconnected. When the second interface is disconnected, pings continue to both the hypervisor and guest VMs.
What could be the cause of this error?
- A. Portfast is not enabled on the switch ports
- B. This is normal behavior for a LAN Failover
- C. Switch ports are configured with different VLANs
- D. One of the network interfaces has a bad patch cable.
Answer: C
NEW QUESTION # 79
......
Revolutionary Guide To Exam Nutanix Dumps: https://www.torrentexam.com/NCP-MCI-6.5-exam-latest-torrent.html
Pass NCP-MCI-6.5 Exam Latest Practice Questions: https://drive.google.com/open?id=1ERmPuHAsbmXYpxDdAnvXIsZ8tJ-FlEwy
