Network Appliance NS0-014 Exam Prep Guide Prep guide for the NS0-014 Exam [Q35-Q56]

Share

Network Appliance NS0-014 Exam Prep Guide: Prep guide for the NS0-014 Exam

2026 New Preparation Guide of Network Appliance NS0-014 Exam

NEW QUESTION # 35
What are two critical elements of the physical layer in an FC MetroCluster configuration? (Select two)

  • A. Mediator server
  • B. Ethernet switches
  • C. FC switches
  • D. ATTO FibreBridge

Answer: C,D


NEW QUESTION # 36
Which task is essential when expanding a MetroCluster system to support additional storage nodes?

  • A. Remove ATTO FibreBridges
  • B. Add new storage shelves and validate SyncMirror configuration
  • C. Disable all replication processes
  • D. Reinstall all controllers

Answer: B


NEW QUESTION # 37
How does NetApp MetroCluster ensure continuous availability in case of hardware failure at one site?

  • A. Load balancing
  • B. Automatic failover to the secondary site
  • C. SnapMirror
  • D. Deduplication of critical data

Answer: B


NEW QUESTION # 38
When the administrator of a MetroCluster configuration creates a mirrored aggregate on the local cluster, which action automatically occurs on both clusters?

  • A. An SVM DR is created.
  • B. A DR group is created.
  • C. A plex is created.
  • D. A failover group is created.

Answer: C


NEW QUESTION # 39
In a MetroCluster environment, which tool is used to validate the configuration before go-live?

  • A. System Manager
  • B. SnapMirror
  • C. System Manager
  • D. Config Advisor

Answer: D


NEW QUESTION # 40
During MetroCluster testing, which two elements should be tested to ensure site failover functionality? (Select two)

  • A. SVM DR relationships
  • B. Management interface configuration
  • C. Storage failover between clusters
  • D. SyncMirror synchronization

Answer: C,D


NEW QUESTION # 41
What does the ONTAP Mediator specifically manage in an IP MetroCluster configuration?

  • A. Load balancing
  • B. Cluster failover events
  • C. Data deduplication
  • D. Data synchronization

Answer: B


NEW QUESTION # 42
A customer is using MetroCluster Tiebreaker software with Observer mode set to true. Tiebreaker just confirmed a disaster at one site. Which two steps must you perform to recover the service?
(Choose two.)

  • A. Execute the metrocluster switchover-forced-on-disaster true command on the surviving site.
  • B. Open a case with the NetApp Support Site before executing any command on the system.
  • C. Verify that the disaster site is down.
  • D. Execute the metrocluster configuration-settings -switchover true command on the disaster site.

Answer: A,C


NEW QUESTION # 43
What is the primary difference between FC MetroCluster and IP MetroCluster?

  • A. IP MetroCluster uses IP-based interconnects for data replication
  • B. IP MetroCluster uses Fibre Channel for replication
  • C. FC MetroCluster supports longer distances
  • D. FC MetroCluster does not support synchronous replication

Answer: A


NEW QUESTION # 44
What should you check in the IMT before performing a hardware expansion in a MetroCluster environment?

  • A. Disk usage
  • B. Compatibility of switches, controllers, and software
  • C. Availability of spare parts
  • D. Number of licensed users

Answer: B


NEW QUESTION # 45
Which MetroCluster component requires reconfiguration when upgrading from a 2-node to a 4- node configuration?

  • A. Mediator
  • B. SyncMirror
  • C. FC switches
  • D. ATTO FibreBridge

Answer: C


NEW QUESTION # 46
During MetroCluster assessment, which network topology is most commonly used for communication between sites?

  • A. Hub-and-spoke
  • B. Mesh
  • C. Star
  • D. Point-to-point

Answer: D


NEW QUESTION # 47
Which two components must be validated to ensure the proper functioning of a Fibre Channel MetroCluster configuration? (Choose two)

  • A. Fibre Channel zoning
  • B. ATTO Bridge health
  • C. Mediator configuration
  • D. SnapMirror configuration

Answer: A,B


NEW QUESTION # 48
What are two key considerations when expanding a MetroCluster environment? (Select two)

  • A. Validate ONTAP and Mediator software compatibility
  • B. Use unsupported hardware to save costs
  • C. Ensure IP and FC switches are compatible with the new nodes
  • D. Reduce the number of controller nodes for better performance

Answer: A,C


NEW QUESTION # 49
Which two configuration steps are essential when installing MetroCluster Tiebreaker software?
(Select two)

  • A. Set up IP connectivity between clusters
  • B. Configure cross-site LIFs
  • C. Install ONTAP Mediator
  • D. Enable SyncMirror

Answer: A,B


NEW QUESTION # 50
During the planning phase, which components are required for a MetroCluster solution assessment? (Select three)

  • A. IP addresses for management
  • B. FC Switches
  • C. ATTO Bridges
  • D. PowerShell integration

Answer: A,B,C


NEW QUESTION # 51
Which of the following are critical factors in planning a MetroCluster deployment? (Select two)

  • A. WAN bandwidth
  • B. Network latency between sites
  • C. Office furniture layout
  • D. Rack size

Answer: A,B


NEW QUESTION # 52
What are two key considerations when deploying a MetroCluster solution? (Select two)

  • A. Distance between MetroCluster sites
  • B. Whether deduplication is enabled
  • C. Type of storage media used
  • D. Bandwidth availability for inter-site communication

Answer: A,D


NEW QUESTION # 53
What are two critical tasks to perform when validating a MetroCluster configuration after an upgrade? (Select two)

  • A. Verify SyncMirror status
  • B. Test storage failover operations
  • C. Run a Tiebreaker simulation
  • D. Reconfigure ATTO FibreBridges

Answer: A,B


NEW QUESTION # 54
What are the main benefits of using IP MetroCluster over FC MetroCluster? (Select two)

  • A. Simpler network infrastructure
  • B. Increased security
  • C. Lower cost of implementation
  • D. Higher data transfer rates

Answer: A,C


NEW QUESTION # 55
When validating the health of a MetroCluster IP configuration, which two tools are essential for network validation? (Select two)

  • A. NetApp Interoperability Matrix Tool (IMT)
  • B. Network troubleshooting tools (ping, traceroute)
  • C. OnCommand Unified Manager
  • D. Config Advisor

Answer: B,D


NEW QUESTION # 56
......

Latest Questions NS0-014 Guide to Prepare Free Practice Tests: https://www.torrentexam.com/NS0-014-exam-latest-torrent.html

NS0-014 Practice Exam - 112 Unique Questions: https://drive.google.com/open?id=1o9QYE_M88fiknHsL6WPUvTHdo0e7TkHL