New 2023 Guaranteed Success with TorrentExam 350-401 Dumps Cisco PDF Questions
Exceptional Practice To Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Pass the First Time
Cisco 350-401 ENCOR certification exam is the first step towards achieving the Cisco Certified Network Professional (CCNP) Enterprise certification. The CCNP Enterprise certification validates the candidates' skills in enterprise networking solutions and technologies, including wireless access, security, network automation, and network assurance. The CCNP Enterprise certification is highly respected by employers worldwide and can open up numerous career opportunities for certified professionals.
NEW QUESTION # 166
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 167
An engineer is configuring local web authentication on a WLAN. The engineer chooses the Authentication radio button under the Layer 3 Security options for Web Policy. Which device presents the web authentication for the WLAN?
- A. anchor WLC
- B. RADIUS server
- C. local WLC
- D. ISE server
Answer: C
Explanation:
"The next step is to configure the WLC for the Internal web authentication. Internal web authentication is the defaultweb authentication type on WLCs."
In step 4 of the link above, we will configure Security as described in this question. Therefore we can deduce thisconfiguration is for Internal web authentication.
This paragraph was taken from the link https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html#c5 :
NEW QUESTION # 168
An engineer is describing QoS to a client. Which two facts apply to traffic policing? (Choose two.)
- A. Policing should be performed as close to the source as possible.
- B. Policing adapts to network congestion by queuing excess traffic.
- C. Policing drops traffic that exceeds the defined rate.
- D. Policing should be performed as close to the destination as possible.
- E. Policing typically delays the traffic, rather than drops it.
Answer: C,D
NEW QUESTION # 169
Refer to the exhibit.
Which statement about the OPSF debug output is true?
- A. The output displays OSPF hello messages which router R1 has sent received on interface Fa0/1.
- B. The output displays all OSPF messages which router R1 has sent to received on interface Fa0/1.
- C. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
- D. The output displays OSPF hello and LSACK messages which router R1 has sent or received.
Answer: A
Explanation:
Explanation
This combination of commands is known as "Conditional debug" and will filter the debug output based on your conditions. Each condition added, will behave like an 'And' operator in Boolean logic. Some examples of the "debug ip ospf hello" are shown below:
NEW QUESTION # 170
An engineer is working with the Cisco DNA Center API Drag and drop the methods from the left onto the actions that they are used for on the right.
Answer:
Explanation:
NEW QUESTION # 171
Refer to the exhibit.
An engineer must allow all users in the 10.2.2.0/24 subnet to access the Internet. To conserve address space the public Interface address of 209 165 201.1 must be used for all external communication. Which command set accomplishes these requirements?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 172
An engineer is configuring a GRE tunnel interface in the default mode. The engineer has assigned an IPv4 address on the tunnel and sourced the tunnel from an Ethernet interface. Which option also is required on the tunnel interface before it is operational?
- A. (config-if)#tunnel destination <ip address>
- B. (config-if)#keepalive <seconds retries>
- C. (config-if)#ip mtu <value>
- D. (config-if)#ip tcp adjust-mss <value>
Answer: A
Explanation:
A GRE interface definition includes:
+ An IPv4 address on the tunnel + A tunnel source + A tunnel destination Below is an example of how to configure a basic GRE tunnel:
interface Tunnel 0 ip address 10.10.10.1 255.255.255.0 tunnel source fa0/0 tunnel destination 172.16.0.2 In this case the "IPv4 address on the tunnel" is 10.10.10.1/24 and "sourced the tunnel from an Ethernet interface" is the command "tunnel source fa0/0". Therefore it only needs a tunnel destination, which is 172.16.0.2.
Note: A multiple GRE (mGRE) interface does not require a tunnel destination address.
NEW QUESTION # 173
Drag and drop the tools from the left onto the agent types on the right.
Answer:
Explanation:
NEW QUESTION # 174
When is the Design workflow used In Cisco DNA Center?
- A. in a brownfield deployment, to modify configuration of existing devices in the network
- B. in a brownfield deployment, to provision and onboard new network devices
- C. in a greenfleld deployment, with no existing infrastructure
- D. in a greenfield or brownfield deployment, to wipe out existing data
Answer: B
NEW QUESTION # 175
Refer to the exhibit.
Which command set must be added to the configuration to analyze 50 packets out of every 100?
A)
B)
C)
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: D
NEW QUESTION # 176
Refer to the exhibit.
Which Python code snippet prints the descriptions of disabled interfaces only?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 177
The login method is configured on the VTY lines of a router with these parameters.
* The first method for authentication is TACACS
* If TACACS is unavailable, login is allowed without any provided credentials Which configuration accomplishes this task?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 178
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
NEW QUESTION # 179
Which statement about the default QoS configuration on a Cisco switch is true?
- A. The Port Cos value is 0.
- B. The Cos value of each tagged packet is modified.
- C. All traffic is sent through four egress queues.
- D. Port trust is enabled.
Answer: A
NEW QUESTION # 180
Drag and drop the tools from the left onto the agent types on the right.
Answer:
Explanation:
NEW QUESTION # 181
How is Layer 3 roaming accomplished in a unified wireless deployment?
- A. The client entry on the original controller is passed to the database on the new controller.
- B. An EoIP tunnel is created between the client and the anchor controller to provide seamless connectivity as the client is associated with the new AP.
- C. The new controller assigns an IP address from the new subnet to the client
- D. The client database on the original controller is updated the anchor entry, and the new controller database is updated with the foreign entry.
Answer: B
NEW QUESTION # 182
A network engineer must configure a router to send logging messages to a syslog server based on these requirements:
uses syslog IP address: 10.10.10.1
uses a reliable protocol
must not use any well-known TCP/UDP ports
Which configuration must be used?
- A. logging origin-id 10.10.10.1
- B. logging host 10.10.10.1 transport udp port 1024
- C. logging host 10.10.10.1 transport tcp port 1024
- D. logging host 10.10.10.1 transport udp port 1023
Answer: C
NEW QUESTION # 183
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
- A. Permit tcp any any range 22 443
Deny tcp any any eq 80 - B. Deny tcp any any eq 80
Permit tcp any any gt 21 it 444 - C. Deny tcp any any ne 80
Permit tcp any any range 22 443 - D. Permit tcp any any ne 80
Answer: B
NEW QUESTION # 184 
Assuming the WLC's interfaces are not in the same subnet as the RADIUS server, which interface would the WLC use as the source for all RADIUS-related traffic?
- A. the interface specified on the WLAN configuration
- B. any interface configured on the WLC
- C. the controller management interface
- D. the controller virtual interface
Answer: A
NEW QUESTION # 185
Refer to the exhibit.
An engineer must configure a SPAN session. What is the effect of the configuration?
- A. Traffic sent on VLANs 10 and 12 only is copied and sent to interface g0/1.
- B. Traffic sent on VLANs 10, 11, and 12 is copied and sent to interface g0/1.
- C. Traffic received on VLANs 10, 11, and 12 is copied and sent to Interface g0/1.
- D. Traffic received on VLANs 10 and 12 only is copied and sent to interface g0/1.
Answer: C
NEW QUESTION # 186
Drag and Drop the decryptions from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 187
An engineer must protect their company against ransom ware attacks. Which solution allows the engineer to block the execution stage and prevent file encryption?
- A. Use Cisco Firepower and block traffic to TOR networks.
- B. Use Cisco AMP deployment with the Malicious Activity Protection engineer enabled.
- C. Use Cisco Firepower with Intrusion Policy and snort rules blocking SMB exploitation.
- D. Use Cisco AMP deployment with the Exploit Prevention engine enabled.
Answer: B
NEW QUESTION # 188
......
Cisco 350-401 ENCOR exam is intended for network engineers and administrators who have experience in implementing and troubleshooting enterprise networks. Candidates should have a deep understanding of networking concepts and protocols, as well as hands-on experience with Cisco networking equipment. To prepare for the exam, candidates can study with Cisco's official study materials, attend training courses, and practice with Cisco's network simulation software.
350-401 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.torrentexam.com/350-401-exam-latest-torrent.html
Best Quality Cisco 350-401 Exam Questions: https://drive.google.com/open?id=1fX4iHoJaXlX365zuriDQAb7ePxDjHytz
