[Oct 22, 2021] 156-915.80 Test Prep Training Practice Exam Questions Practice Tests
Exam Questions Answers Braindumps 156-915.80 Exam Dumps PDF Questions
The benefit in Obtaining the 156-915.80 Exam Certification
- Score CP job opportunities
- This 156-215.80 exam covers a different technology to meet the needs of varying job roles
- Gain employer recognition for promotions and raises
- Capture the attention of recruiters
NEW QUESTION 296
To help SmartEvent determine whether events originated internally or externally you must define using the initial settings under General Settings in the Policy Tab. How many options are available to calculate the traffic direction?
- A. 4. Incoming; Outgoing; Internal; Other
- B. 2 Internal; External
- C. 5 Network, Host, Objects, Services, API
- D. 3 Incoming; Outgoing; Network
Answer: A
NEW QUESTION 297
Which one of these features is NOT associated with the Check Point URL Filtering and Application Control Blade?
- A. Use UserCheck to help users understand that certain websites are against the company's security policy.
- B. Detects and blocks malware by correlating multiple detection engines before users are affected.
- C. Make rules to allow or block applications and Internet sites for individual applications, categories, and risk levels.
- D. Configure rules to limit the available network bandwidth for specified users or groups.
Answer: B
Explanation:
Use the URL Filtering and Application Control Software Blades to:
NEW QUESTION 298
Which TCP-port does CPM process listen to?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 299
Type the full fw command and syntax that allows you to disable only sync on a cluster firewall member.
Answer:
Explanation:
fw ctl setsync off
NEW QUESTION 300
You have a Gateway is running with 2 cores. You plan to add a second gateway to build a cluster and used a device with 4 cores. How many cores can be used in a Cluster for Firewall-kernel on the new device?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 301
You find one of your cluster gateways showing "Down" when you run the "cphaprob stat" command. You then run the "clusterXL_admin up" on the down member but unfortunately the member continues to show down.
What command do you run to determine the case?
- A. cphaprob -d-s report
- B. cphaprob -a list
- C. cphaprob -f register
- D. cpstat-f-all
Answer: B
Explanation:
Explanation/Reference: http://dl3.checkpoint.com/paid/63/6357d81e3b75b5a09a422d715c3b3d79/ CP_R80.10_ClusterXL_AdminGuide.pdf?
HashKey=1522170580_c51bd784a86600b5f6141c0f1a6322fd&xtn=.pdf
NEW QUESTION 302
Firewall policies must be configured to accept VRRP packets on the GAiA platform if it runs Firewall software. The Multicast destination assigned by the Internet Assigned Numbers Authority (IANA) for VRRP is:
- A. 224.0.0.5
- B. 224.0.0.18
- C. 224.0.0.102
- D. 224.0.0.22
Answer: B
Explanation:
Explanation/Reference:
Reference: https://www.iana.org/assignments/multicast-addresses/multicast-addresses.xhtml
NEW QUESTION 303
You enable Hide NAT on the network object, 10.1.1.0 behind the Security Gateway's external interface. You browse to the Google Website from host, 10.1.1.10 successfully. You enable a log on the rule that allows
10.1.1.0 to exit the network. How many log entries do you see for that connection in SmartView Tracker?
- A. Only one, inbound
- B. Two, both outbound, one for the real IP connection and one for the NAT IP connection
- C. Only one, outbound
- D. Two, one for outbound, one for inbound
Answer: C
NEW QUESTION 304
You are the Security Administrator for MegaCorp. A Check Point firewall is installed and in use on a platform using GAiA.
You have trouble configuring the speed and duplex settings of your Ethernet interfaces. Which of the following commands can be used in CLISH to configure the speed and duplex settings of an Ethernet interface and will survive a reboot? Give the BEST answer.
- A. ifconfig -a
- B. mii_tool
- C. ethtool
- D. set interface <options>
Answer: D
NEW QUESTION 305
Use the table to match the BEST Management High Availability synchronication-status descriptions for your Security Management Server (SMS).
Exhibit:
- A. A-3, B-5, C-2, D-4
- B. A-3, B-1, C-4, D-2
- C. A-5, B-3, C-1, D-2
- D. A-3, B-1, C-5, D-4
Answer: D
NEW QUESTION 306
In what way in Secure Network Distributor (SND) a relevant feature of the Security Gateway?
- A. SND is a feature to accelerate multiple SSL VPN connections
- B. SND is used to distribute packets among Firewall instances
- C. SND is a feature of fw monitor to capture accelerated packets
- D. SND is an alternative to IPSec Main Mode, using only 3 packets
Answer: B
Explanation:
Explanation/Reference:
Reference: https://sc1.checkpoint.com/documents/R76/
CP_R76_PerformanceTuning_WebAdmin/6731.htm
NEW QUESTION 307
Which command will reset the kernel debug options to default settings?
- A. fw ctl debug set 0
- B. fw ctl debug 0
- C. fw ctl dbg resetall
- D. fw ctl dbg -a 0
Answer: B
Explanation:
Explanation
Reset the debugs to the default.
In case someone changed the setting in the past and since then the firewall was not rebooted we should set all back to the defaults.
References:
NEW QUESTION 308
What is the command to show SecureXL status?
- A. fwaccel status
- B. fwaccel stat
- C. fwaccel -s
- D. fwaccel stats -m
Answer: B
Explanation:
To check overall SecureXL status:
[Expert@HostName]# fwaccel stat
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk41397
NEW QUESTION 309
When installing a dedicated R80 SmartEvent server, what is the recommended size of the root partition?
- A. Any size
- B. Less than 20GB
- C. At least 20 GB
- D. More than 10 GB and less than 20GB
Answer: C
Explanation:
Reference: https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/ CP_R80.10_LoggingAndMonitoring_AdminGuide/html_frameset.htm?topic=documents/R80.10/ WebAdminGuides/EN/CP_R80.10_LoggingAndMonitoring_AdminGuide/120829
NEW QUESTION 310
CORRECT TEXT
Fill in the blank. You can set Acceleration to ON or OFF using command syntax
___________ .
Answer:
Explanation:
fwaccel off/on
NEW QUESTION 311
The fwd process on the Security Gateway sends logs to the fwd process on the Management Server via which 2 processes?
- A. fwd via cpm
- B. fwd via cpd
- C. cpm via cpd
- D. fwm via fwd
Answer: A,D
NEW QUESTION 312
Which Security Gateway R80 configuration setting forces the Client Authentication authorization time-out to refresh, each time a new user is authenticated? The:
- A. Global Properties > Authentication parameters, adjusted to allow for Regular Client Refreshment.
- B. Refreshable Timeout setting, in Client Authentication Action Properties > Limits.
- C. Time properties, adjusted on the user objects for each user, in the Client Authentication rule Source.
- D. IPS > Application Intelligence > Client Authentication > Refresh User Timeout option enabled.
Answer: B
NEW QUESTION 313
......
Check Point CCSE Exam Certification Details:
| Sample Questions | Check Point CCSE Sample Questions |
| Passing Score | 70% |
| Exam Code | 156-915.80 |
| Schedule Exam | Pearson VUE |
| Duration | 90 mins |
| Number of Questions | 90 |
| Exam Name | Check Point Certified Security Expert (CCSE) R80 Update |
| Books / Training | CCSE Training |
| Exam Price | $250 (USD) |
Download Free CheckPoint 156-915.80 Real Exam Questions: https://www.torrentexam.com/156-915.80-exam-latest-torrent.html
