Provide Valid NCA-6.5 Dumps To Help You Prepare For Nutanix Certified Associate (NCA) v6.5 exam Exam Jul 19, 2024
Nutanix NCA-6.5 Dumps Questions [2024] Pass for NCA-6.5 Exam
NEW QUESTION # 68
How many copies of metadata are written for a Replication Factor of 2 (RF2)?
- A. 0
- B. 1
- C. l
- D. 2
Answer: B
NEW QUESTION # 69
Which cluster configuration is LCM unable to perform firmware upgrades against?
- A. Two - node
- B. Five-node
- C. Single-node
- D. Three-node
Answer: C
Explanation:
LCM (Lifecycle Manager) is a tool provided by Nutanix to automate software and firmware upgrades for Nutanix clusters. However, LCM is unable to perform firmware upgrades against a (D) Single-node cluster configuration.
This is because a single-node cluster does not have any redundancy, so there is no way to perform an upgrade without taking the entire cluster offline. In contrast, multi-node clusters can typically be upgraded in a rolling fashion, with one or more nodes being upgraded at a time while the rest of the cluster remains online.
LCM is capable of performing firmware upgrades against two-node, three-node, and five-node cluster configurations, as long as they meet the other requirements for LCM support (such as being on a supported AOS release and having the appropriate network connectivity).
NEW QUESTION # 70
By default, Nutanix Files will deploy how many FSVMs within a Nutanix cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 71
Refer to the exhibit.
What is true about the network uplink ports?
- A. They are configured in Active-Backup mode.
- B. One is connected at 1GbE and the other is 10GbE.
- C. All are connected, but only two are carrying traffic.
- D. They are configured in Active-Active mode.
Answer: A
Explanation:
In Nutanix, all the network uplink ports are connected, but only two of them are carrying traffic at any given time. This is done to provide redundancy and failover in case one of the ports fails. The two ports that are carrying traffic are chosen based on the link aggregation policy configured. The link aggregation policy can be configured to use either Active-Active or Active-Backup mode. In Active-Active mode, both ports are active and carrying traffic, while in Active-Backup mode, only one port is active and carrying traffic, the other port is on standby. Reference: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_11:wc-network-configuring-uplink-ports_wc-network-configuring-uplink-ports.html
NEW QUESTION # 72
When Does AOS automatically Generate a case with nutanix Support?
- A. When disk space usage is high above 90%
- B. For every alert detected by pulse Diagnostics
- C. On failure of a scheduled NCC check
- D. When losing network connectivity to the CVM
Answer: C
NEW QUESTION # 73
An administrator manages a memory-sensitive application that consists of multiple VMs. The administrator needs to understand if workloads, historically, have been evenly distributed across these VMs.
What should the administrator do?
- A. Filter VMs list by using Memory Usage.
- B. Add Memory usage chart to Analysis dashboard for each required VM.
- C. Run cluster efficiency summary report selecting all the VMs that constitute the applications.
- D. Create an Alert Policy with VM as entity type and memory usage as a metric.
Answer: A
NEW QUESTION # 74
What is Nutanix's scale-out storage technology that makes its hyperconverged platform possible?
- A. Hot swappable NVMe/SSD
- B. Distributed File Services
- C. HDD/SDD Storage Tiers
- D. Distributed Storage Fabric
Answer: D
Explanation:
Nutanix's scale-out storage technology, the Distributed Storage Fabric, makes its hyperconverged platform possible. It provides a single, unified layer of storage to multiple nodes in a cluster, allowing data to be stored, accessed, and processed in a distributed, fault-tolerant manner. Reference: https://www.nutanix.com/what-is-nutanix/distributed-storage-fabric/
NEW QUESTION # 75
Which option is available for an administrator to upload a remote disk file to Image Configuration?
- A. SFTP
- B. FTP
- C. HTTP
- D. SCP
Answer: A
Explanation:
SFTP (Secure File Transfer Protocol) is an option available for an administrator to upload a remote disk file to Image Configuration. SFTP is a secure protocol that ensures that the data being transferred is encrypted and is therefore more secure than other transfer protocols such as FTP or HTTP. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-remote-disk-upload-c.html
NEW QUESTION # 76
What is the purpose of Discoveries within the Nutanix Support Portal?
- A. To identify VMs that require OS updates or patching.
- B. To provide forecasting of cluster resource utilization.
- C. To identify clusters that are affected by known issues.
- D. To provide an audit trail of cluster logins.
Answer: C
Explanation:
Discoveries within the Nutanix Support Portal are used to identify clusters that are affected by known issues. This can help Nutanix Support quickly identify and address any potential problems that may be caused by a specific issue. Reference: https://portal.nutanix.com/page/documents/details?targetId=Support-Portal-User-Guide-v2_0:sp-discoveries-c.html
NEW QUESTION # 77
Which platform supports firmware updates through LCM?
- A. Hitachi Vantara
- B. Huawei Atlas
- C. Dell PowerEdge
- D. * Lenovo HX
Answer: D
NEW QUESTION # 78
A single host in a four-node AHV-based cluster experiences a complete network failure.
If more than enough resources exist in the cluster to tolerate a node failure, what happens to the user VMs running on that host?
- A. VMs automatically restart on the three remaining hosts.
- B. VMs stay up, but are unreachable until connectivity is restored.
- C. VMs remain down until network connectivity is restored.
- D. VMs are live-migrated to the three remaining hosts.
Answer: B
Explanation:
In the case of a single host in a four-node AHV-based cluster experiencing a complete network failure, the user VMs running on that host will stay up, but will be unreachable until connectivity is restored. This is because if more than enough resources exist in the cluster to tolerate a node failure, the VMs will continue to run, but will be unable to communicate with other nodes in the cluster due to the network failure. This is stated in the official Nutanix Certified Associate (NCA) v6.5 study guide on page 49, under the heading "Virtual Machine Availability in the Event of Node Failure".
NEW QUESTION # 79
Which tool provides diagnostic system data for Nutanix to deliver proactive support? (Choose Correct answer and give explanation/References from Nutanix Certified Associate (NCA) v6.5 official study resources)
- A. Pulse
- B. Cluster health
- C. Cluster Heart
- D. NCC
Answer: A
Explanation:
Pulse is a built-in tool that periodically collects and sends diagnostic data to Nutanix support for proactive monitoring and troubleshooting. This data includes cluster configuration, performance metrics, and error logs, among other things. Nutanix support can use this data to identify and resolve issues before they become critical, and to provide recommendations for optimizing cluster performance.
NCC (Nutanix Cluster Check) is another tool provided by Nutanix, but it is used for performing manual health checks and diagnostics on the cluster, rather than providing proactive support.
Cluster Heart and Cluster Health are not tools provided by Nutanix, and are not relevant to this question.
NEW QUESTION # 80
Refer to the exhibit.
An administrator notices that the Data Resiliency Statue of some components has been reduced to 0. making it impossible to support a node failure in the cluster.
What type of failure is most likely the cause of this issue?
- A. Block
- B. CVM
- C. Disk
- D. Nods
Answer: B
NEW QUESTION # 81
What is the minimum number of nodes needed to configure a Replication Factor of 2 (RF2)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 82
Which Nutanix replication type needs to be assigned to a VM to allow cross cluster live migration?
- A. NearSync
- B. Move
- C. Asynchronous
- D. Synchronous
Answer: D
NEW QUESTION # 83
An administrator receives an alert that a node has failed within a Nutanix AHV-based 10-node cluster. Before the failure, the cluster CPU and memory utilization was around 50%.
What actions will the cluster automatically take?
- A. All HA-protected VMs will be automatically restarted on other nodes in the cluster.
- B. VMs will migrate to other nodes in the cluster with no user impact.
- C. VMs will be unavailable until the affected host is fully functional.
- D. The cluster will enter read-only mode and the VMs will be powered down to preserve data.
Answer: A
Explanation:
Nutanix supports high availability (HA) for VMs by automatically restarting them on other nodes in the cluster in case of a node failure. The cluster CPU and memory utilization will increase temporarily until the failed node is recovered, but there will be no user impact. Reference: https://www.nutanix.com/content/dam/nutanix/resources/misc/ebg-nca-6-5.pdf (page 28)
NEW QUESTION # 84
Which area of the Prism Element homepage displays a cluster's current fitness?
- A. Performance and Usage Statistics
- B. Alert and Messages
- C. Settings and Configuration
- D. Health and Data Resiliency
Answer: D
NEW QUESTION # 85
What is the minimum number of blocks required to utilize block awareness?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 86
A SQL Server cluster has been deployed on an AHV cluster. To ensure maximum uptime, the administrator wants the SQL Server VMs running on different hosts while leveraging High Availability in case of host failure.
Which configuration would meet these requirements?
- A. Disable VM live migration from selected VMs.
- B. Configure one VM as an Agent VM
- C. Disable Host affinity rules in the cluster
- D. Create an anti-affinity rule via CLI.
Answer: D
Explanation:
Anti-affinity rules are used to ensure that virtual machines are not running on the same physical host. This can be useful in situations where the administrator wants to ensure that virtual machines are running on different hosts for high availability and to minimize the impact of a host failure. By creating an anti-affinity rule via CLI, the administrator can ensure that the SQL Server VMs are running on different hosts while still leveraging high availability in case of host failure. Reference: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_11:wc-affinity-anti-affinity-rules_wc-affinity-anti-affinity-rules.html
NEW QUESTION # 87
An administrator needs to create a new chart to analyze GPU usage.
Which entity should be added to the chart?
- A. Virtual Machine
- B. Cluster
- C. GPU
- D. Host
Answer: A
NEW QUESTION # 88
What resource should be used to ensure a successful upgrade of the hypervisors and AOS within a vSphere-based Nutanix cluster?
- A. Hardware Replacement Documentation
- B. Upgrade Paths
- C. Compatibility and Interoperability Matrix
- D. Field Advisories
Answer: C
Explanation:
The Compatibility and Interoperability Matrix (CIM) is the resource that should be used to ensure a successful upgrade of the hypervisors and AOS within a vSphere-based Nutanix cluster. The CIM provides information about the compatibility and interoperability of the different components of the Nutanix cluster, including the hypervisors, AOS, and other related components. Reference: https://www.nutanix.com/support/compatibility-matrix/
NEW QUESTION # 89
Which Windows technology does AHV support to prevent authentication theft?
- A. Windwos Defender Credential Guard
- B. Active Directory federation Services
- C. Endpoint Manager
- D. Azure AD Multi-Factor
Answer: B
NEW QUESTION # 90
On which Prism Element dashboard can an administrator identify that a node is in maintenance mode prior to an LCM upgrade?
- A. Analysis
- B. Hardware
- C. Alerts
- D. Settings
Answer: B
NEW QUESTION # 91
Which account is recommended for performing tasks and operations on the CVM via SSH?
- A. nutanix
- B. root
- C. admin
- D. administrator
Answer: C
NEW QUESTION # 92
Refer to the exhibit.
After an abrupt power outage, an administrator receives a number of alerts indicating disks are failed. Prism Element shows a large number of disks offline as seen in the diagram. This single block, four node cluster is configured FT1 with an RF2 container holding all user data.
What number of drive failures on different domains (node, block, or rack) could this configuration have tolerated prior to seeing data unavailability?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
This single-block, four-node cluster is configured with Fault Tolerance 1 (FT1) and a Replication Factor of 2 (RF2). This means that the data is replicated across two domains (node, block, or rack). Thus, the cluster can tolerate up to two drive failures on different domains before seeing data unavailability. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Admin-Guide-v5_6:pr-data-protection-replication-factor-c.html This single block, four node cluster is configured with Fault Tolerance (FT1) and a Replication Factor (RF2) container holding all user data. FT1 means that there are two copies of data stored across the cluster, and RF2 means that there are two copies of data stored in the container. This configuration can tolerate 2 drive failures on different domains (node, block, or rack) prior to seeing data unavailability.
With FT1, if a drive fails, the second copy of the data is still available and can be used to reconstruct the data. With RF2, if a drive fails, the second copy of the data is still available and can be used to reconstruct the data. However, if a drive failure occurs on a different domain (node, block, or rack) from the one containing the other copy of data, the second copy of the data is still available, but the data availability may be affected.
It's important to note that this is the maximum drive failures that the configuration can tolerate, and it's recommended to have a disaster recovery plan in place in case of a drive failure, to ensure the data availability and integrity.
You can find more information on this topic in the Nutanix Administrator Guide, which is available on the Nutanix support website https://portal.nutanix.com/#/page/docs/details?targetId=Admin-Guide-Prism-v5_24:Admin-Guide-Prism-v5_24
NEW QUESTION # 93
......
Achieve Success in Actual NCA-6.5 Exam NCA-6.5 Exam Dumps: https://www.torrentexam.com/NCA-6.5-exam-latest-torrent.html
Updated Nutanix Study Guide NCA-6.5 Dumps Questions: https://drive.google.com/open?id=1dLneaksVQD9c0m44vC4TJISBm9H1A7eT
