Verified VCS-279 Dumps Q&As - VCS-279 Test Engine with Correct Answers
Pass Your VCS-279 Dumps as PDF Updated on 2022 With 90 Questions
NEW QUESTION 52
An administrator configures a policy to perform file system backups of multiple client systems using the "Allow multiple data streams" feature. All other policy attributes are at default settings.
Which master server host property must be configured to enable the backup job from all clients to run concurrently?
- A. Client Attributes > Maximum data streams
- B. Global Attributes > Maximum jobs per client
- C. Policy storage unit > Enable multiplexing
- D. Policy storage unit > Maximum concurrent jobs
Answer: B
NEW QUESTION 53
An administrator has a master server running over 50,000 jobs per day.
What can the administrator do to reduce the load on the master server?
- A. configure a new master server to distribute the backup load
- B. configure client-side deduplication and load balancing media servers
- C. add additional media servers to the environment
- D. replicate the backups to another master server domain
Answer: C
NEW QUESTION 54
After creating a NBU-Catalog type backup policy, an administrator receives the following message:
DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.
Which two options are available to the administrator to ensure the DR file is available for future use? (Choose two.)
- A. ensure the folder DR file is on a non-root volume
- B. configure a valid email address of the administrator in the "Send email" option
- C. ensure the DR file is created on a volume other than the NetBackup volume
- D. ensure the NetBackup catalog is on a non-root volume
- E. configure Auto Image Replication to send the DR file to a remote master server
Answer: B,C
NEW QUESTION 55
What is the certificate deployment and management behavior when the security level is set to High?
- A. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every hour.
- B. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- C. Certificates are deployed with a token for all hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- D. Certificates are deployed automatically for all hosts and the Certificate Revocation List (CRL) is refreshed every hour.
Answer: B
NEW QUESTION 56
Refer to the exhibit.
A backup policy uses a Full backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Thursday.
When will the next backup run, if all prior backups completed successfully?
- A. Monday at 1:00
- B. Friday at 10:00
- C. Monday at 2:00
- D. Friday at 2:00
Answer: C
NEW QUESTION 57
An administrator has configured a Storage Lifecycle Policy (SLP) to protect a large number of clients which directs backups to Advanced Disk, then duplicates the images to tape. The administrator is experiencing an SLP backlog, which is causing backups to fail. The current values of key configuration settings are listed below:
Host Properties - Maximum data streams per client = 1 Policy Settings - Maximum jobs per policy = 20 Disk Pool Settings - Maximum I/O streams = 20 Storage Unit Settings - Maximum concurrent jobs = 20 Storage Unit Settings - Multiplexing level = 20 Which parameter should the administrator change to reduce the SLP backlog and allow the backups to complete successfully?
- A. Increase Maximum jobs per policy
- B. Increase Maximum I/O streams for the disk pool
- C. Increase Maximum concurrent jobs for the storage unit
- D. Increase Maximum data streams per client
Answer: A
NEW QUESTION 58
Refer to the Exhibit.
An administrator is trying to access client properties on the NetBackup Administration Console and receives the following message:
When checking the services on the master server, the administrator sees that the PBX service is down.
Which two commands can the administrator use to increase the PBX log level to determine the reason for the message above? (Choose two.)
- A. pbx_exchange
- B. pbxcfg
- C. vxpbx_exchanged
- D. vxlogcfg
- E. vxlogmgr
Answer: D,E
NEW QUESTION 59
An administrator is creating a Standard policy with the option "Use Accelerator" to back up files on a Linux server. Which two options are disabled by default in this type of policy? (Select two.)
- A. Allow multiple data streams
- B. Cross mount points
- C. Encrypt
- D. Collect true image restore information
- E. Compress
Answer: B,D
NEW QUESTION 60
A new storage shelf is added to an existing appliance.
Which command under Manage > Storage must the administrator perform first after a new shelf is connected to the appliance and the appliance is powered on?
- A. Edit
- B. Add
- C. Scan
- D. Resize
Answer: C
NEW QUESTION 61
An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable.
Which command should the administrator use to recreate the DR file?
- A. bpimporc
- B. nbcat sync
- C. cat_iinport
- D. bprecover
Answer: A
NEW QUESTION 62
A NetBackup master server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of "Maximum concurrent jobs" for the storage unit and "Limit I/O streams" for the disk pool are both set to 4.
There are 35 jobs queued on the master server that require this disk pool:
5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?
- A. Replication
- B. Duplication
- C. Restore
- D. Backup
Answer: C
NEW QUESTION 63
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?
- A. enable Windows Change Journal
- B. modify data buffer settings for the data path
- C. enable the Use Accelerator policy attribute
- D. use Flashbackup-Windows policy type
Answer: A
NEW QUESTION 64
An administrator creates a Storage Lifecycle Policy (SLP) to take advantage of optimized duplication. The backup and subsequent duplication jobs launch as configured in the SLP.
What may cause the secondary duplication job to run as non-optimized?
- A. Both source and destination storage servers have only one media server in common.
- B. Both compression and encryption attributes are disabled in the backup policy.
- C. Optimized duplication requires the media servers to be configured as Fibre Transport media servers.
- D. Optimized duplication is unsupported when a storage unit group is the target of the duplication.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 65
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?
- A. from the master server, run bpimage to change the host name of the media server from mediaA to mediaB
- B. verify both media servers are set up in the master server host properties in the "Restore Failover" section
- C. in the BAR console, change the "Server to use for backup and restores" setting to mediaB
- D. set "Enable unrestricted media sharing for all media servers" in the master server host properties in the Media section
Answer: A
NEW QUESTION 66
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
- A. set the "Allow multiple data streams" policy attribute
- B. enable multiplexing for the storage unit and set the value
- C. enable the "Limit Jobs per policy" attribute
- D. set the "Maximum jobs per client" host property
Answer: B
NEW QUESTION 67
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?
- A. robots
- B. rtid
- C. vmd
- D. bptm
Answer: D
NEW QUESTION 68
An administrator has a NetBackup Appliance that failed to CALL HOME during an unexpected hard drive failure.
Which two reasons may have prevented CALL HOME from working? (Choose two.)
- A. Call Home is set to disabled.
- B. The MyVeritas Credentials are incorrect.
- C. The factory installed license key is expired.
- D. The Call Home Proxy settings are incorrect.
- E. TELEMETRY_UPLOAD is disabled (Set to 'NO').
Answer: A,E
NEW QUESTION 69
......
Veritas VCS-279 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Monitor and Maintain NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | -Describe how to manage tape devices and tape media. -Describe image management concepts and how to use the NetBackup administration console to verify, expire, import, and manually duplicate backup images. -Describe how to manage NetBackup disk and cloud storage. -Interpret available reports to verify and monitor NetBackup. -Describe how and when to prioritize, cancel, suspend, resume, restart, retry or manually run backup and duplication jobs. -Describe how to initiate, prioritize, and monitor NetBackup restore jobs. -Describe how to manage NetBackup Security (e.g., RBAC, host certificates). -Describe how to install client updates (e.g., VxUpdate). -Describe how to interact with NetBackup on appliances. -Describe how to manage NetBackup Appliances using Appliance Shell Menu (CLISH) and Appliance Web Console. -Describe how to obtain and install NetBackup Appliance updates and EEBs using Appliance Shell Menu (CLISH), Appliance Management Server (AMS), and Appliance Web Console. -Monitor NetBackup Appliances |
| Tune NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | -Analyze, optimize, and tune NetBackup. -Analyze, optimize, and tune NetBackup Appliances using Appliance Shell Menu (CLISH) and Appliance Web Console. |
| Troubleshoot NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | - Interpret status codes and job details in order to diagnose and troubleshoot failed jobs. -Troubleshoot devices and media, including connectivity between master, media, and client. -Troubleshoot common issues related to NetBackup disaster recovery including recovering the NetBackup catalog. -Troubleshoot basic NetBackup Appliance issues. |
| Configure NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | -Describe how to configure various master/media/client settings and host properties using the NetBackup administration console. -Describe how to configure removable media (tape), volume pools, volume groups, and media manager storage units. -Describe how to configure disk and cloud storage, storage units, and storage unit groups. -Describe how to configure and utilize backup policies. -Explain how to implement specialized backup solutions including synthetic backups, True Image Restore (TIR), multiple data streams, checkpoint restart, and the use of backup duplication solutions such as disk staging, Storage Lifecycle Policies, Auto Image Replication, and NetBackup Accelerator. -Describe the function, uses, configuration, and administration of the NetBackup deduplication options, such as media server deduplication, client-side deduplication, optimized duplication, and storage servers. -Describe how to perform catalog backup configuration tasks. -Describe how to configure appliances through Appliance Shell Menu (CLISH) and Appliance Web Console. |
Veritas NetBackup and NetBackup Appliances Administration Exam Certification Details:
| Exam Name | Veritas Certified Specialist (VCS) - NetBackup and NetBackup Appliances |
| Exam Price | $225 (USD) |
| Number of Questions | 80 - 90 |
| Exam Code | VCS-279 |
Pass Veritas VCS-279 Exam Info and Free Practice Test: https://www.torrentexam.com/VCS-279-exam-latest-torrent.html
