[2021] Use Valid NSE7_SDW-6.4 Exam - Actual Exam Question & Answer
Test Engine to Practice NSE7_SDW-6.4 Test Questions
NEW QUESTION 18
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. Both SD-WAN member interfaces have used separate SLA targets.
- B. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- C. Port1 became dead 1ecause no traffic was offload through the egress of port1.
- D. SD-WAN member interfaces are affected by the SLA state of the inactive interface
Answer: B
NEW QUESTION 19
Refer to exhibits.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The initial session of an application goes through a learning phase in order to apply the correct rule.
- B. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
- C. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.
- D. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.
Answer: B,C
NEW QUESTION 20
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. Changes have been made on firewall policy ID 1 on FortiGate.
- B. Firewall policy ID 1 has source NAT disabled.
- C. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- D. FortiGate has terminated the session after a change on policy ID 1.
Answer: A
NEW QUESTION 21
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )
- A. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- B. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
- C. London generates an IKE information message that contains the Toronto public IP address
- D. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
Answer: B,D
NEW QUESTION 22
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. The packet exceeded the configured bandwidth and was dropped based on the priority configuration.
- B. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
- C. Packets exceeding the configured concurrent connection limit are dropped based on the priority configuration.
- D. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
Answer: B
NEW QUESTION 23
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links One link has random jitter and latency issues and is based on a wireless connection Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD_WAN rules?
- A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- B. Use the performance SLA targets to detect latency and jitter instantly.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Place the troublesome link at the top of the interface preference list.
- E. Choose the suitable interface based on the interface cost and weight.
Answer: A,B
NEW QUESTION 24
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. There are separate virtual interfaces for each dial-up client
- B. VPN static routes are prevented from populating the FortiGate routing table
- C. FortiGate created a single IPsec virtual interface that is shared by all clients
- D. 100.64.3.1 is one of the remote IP address that comes through index interlace 1.
Answer: A
NEW QUESTION 25
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.
Based on the exhibits, which statement is correct?
- A. The dead member interface stays unavailable until an administrator manually brings the interface back.
- B. Check interval is the time to wait before a packet sent by a member interface considered as lost.
- C. Port2 needs to wait 500 milliseconds to change the status from alive to dead.
- D. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
Answer: D
NEW QUESTION 26
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. Both SD-WAN member interfaces have used separate SLA targets.
- B. Port1 became dead because no traffic was offload through the egress of port1.
- C. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- D. SD-WAN member interfaces are affected by the SLA state of the inactive interface.
Answer: C
NEW QUESTION 27
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Use unique Diffie Hellman groups on each VPN interface.
- B. Configure the IKE mode to be aggressive mode.
- C. Use different proposals are used between the interfaces.
- D. Specify a unique peer ID for each dial-up VPN interface.
Answer: A,C
NEW QUESTION 28
Refer to exhibits.
Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate.
Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)
- A. All the existing sessions will be blocked from using port1 and port2.
- B. All the existing sessions that do not use SNAT will be flushed and routed through port1.
- C. All the existing sessions using SNAT will be flushed and routed through port1.
- D. All the existing sessions will continue to use port2, and new sessions will use port1.
Answer: C,D
NEW QUESTION 29
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )
- A. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices
- B. It improves SD-WAN performance on the managed FortiGate devices.
- C. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server
- D. It sends probe signals as health checks to the beacon servers on behalf of FortiGate
- E. It acts as a policy compliance entity to review all managed FortiGate devices
Answer: A,C
NEW QUESTION 30
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers. The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links. One link has random jitter and latency issues, and is based on a wireless connection.
Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD-WAN rules? (Choose two.)
- A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- B. Use the performance SLA targets to detect latency and jitter instantly.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Place the troublesome link at the top of the interface preference list.
- E. Choose the suitable interface based on the interface cost and weight.
Answer: A,B
NEW QUESTION 31
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two )
- A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.
- B. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.
- C. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.
- D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
Answer: B,D
NEW QUESTION 32
Refer to the exhibit.
Based on output shown in the exhibit, which two commands can be used by SD-WAN rules? (Choose two.)
- A. set load-balance-mode source-ip-based.
- B. set cost 15.
- C. set source 100.64.1.1.
- D. set priority 10.
Answer: A,D
NEW QUESTION 33
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The web filter profile must be enabled on the firewall policy
- B. The application control profile must be enabled on the firewall policy.
- C. The URL category must be specified on the traffic shaping policy
- D. The shaper mode must be applied per-IP shaper on the traffic shaping policy
Answer: A
NEW QUESTION 34
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
- B. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- C. It ensures route tags match the SD-WAN rule based on the rule order
- D. It tags each route and references the tag in the routing table.
Answer: C
NEW QUESTION 35
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. Each IP is guaranteed a minimum 10 Mbps of bandwidth
- B. The 10 Mbps bandwidth is shared equally among the IP addresses.
- C. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- D. A single user uses the allocated bandwidth divided by total number of users.
Answer: C
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/885253/per-ip-traffic-shaper
NEW QUESTION 36
Which two statements describe how IPsec phase 1 main mode is different from aggressive mode when performing IKE negotiation? (Choose two )
- A. A peer ID is included in the first packet from the initiator, along with suggested security policies.
- B. The use of Diffie Hellman keys is limited by the responder and needs initiator acceptance.
- C. A total of six packets are exchanged between an initiator and a responder instead of three packets.
- D. XAuth is enabled as an additional level of authentication, which requires a username and password.
Answer: C,D
NEW QUESTION 37
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices
- B. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- C. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager
- D. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager
Answer: B,C
NEW QUESTION 38
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Reverse policy shaping mode
- B. Interface-based shaping mode
- C. Per-IP shaping mode
- D. Shared policy shaping mode
Answer: D
NEW QUESTION 39
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link sla-lcg
- B. diagnose sys virtual-wan-link log
- C. diagnose sys virtual-wan-link health-check
- D. diagnose sys virtual-wan-link intf-sla-log
Answer: C
NEW QUESTION 40
Which statement about using BGP routes in SD-WAN is true?
- A. Dynamic routing protocols can be used only with non-encrypted traffic
- B. Adding static routes must be enabled on all ADVPN interfaces.
- C. VPN topologies must be form using only BGP dynamic routing with SD-WAN
- D. Learned routes can be used as dynamic destinations in SD-WAN rules
Answer: C
NEW QUESTION 41
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys virtual-wan-link route-tag-list
- B. diagnose sys virtual-wan-link neighbor.
- C. diagnose sys virtual-wan-link member.
- D. diagnose sys virtual-wan-link service
Answer: C
NEW QUESTION 42
......
Fortinet NSE7_SDW-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NSE7_SDW-6.4 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.torrentexam.com/NSE7_SDW-6.4-exam-latest-torrent.html
