Check Real Cisco 350-801 Exam Question for Free (2024)
Get Ready to Boost your Prepare for your 350-801 Exam with 390 Questions
NEW QUESTION # 16
Which two media encryptions should be used when configuring SRTP between Cisco UCM and Cisco VCS Expressway? (Choose two.)
- A. optional
- B. pass-through
- C. none
- D. mandatory
- E. priority
Answer: C,D
NEW QUESTION # 17
Which two DNS records must be created to configure Service Discovery for or premises Jabber? (Choose two.)
- A. _xmpp._tls.cisco.com pointing to a record of IM&P
- B. _cuplogin._tls.cisco com pointing to the IP address of IM&P
- C. _cisco-uds._tls.cisco.com pointing to the IP address of Cisco Unified Communications Manager
- D. _cuplogin._tcp.cisco.com pointing to a record of IM&P
- E. _cisco-uds._tcp.cisco com painting to a record of Cisco Unified CM
Answer: C,D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/ CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns- configuration-guide_chapter_010.html
NEW QUESTION # 18
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet link with a bandwidth of 160 kb to the Internet Telephony Service Provider.
Which set of commands allows the engineer to complete the task without compromising voice quality?
- A. dial-peer voice 1 voip
translation-profile outgoing Strip9
max-conn 5
destination-pattern 91[2-9]..[2-9]......$
session protocol sipv2
session target ipv4:142.45.10.1
dtmf-relay rtp-nte sip-notify sip-kpml
codec mp4a-latm - B. dial-peer voice 1 voip
translation-profile outgoing Strip9
max-conn 5
destination-pattern 91[2-9]..[2-9]......$
session protocol sipv2
session target ipv4:142.45.10.1
dtmf-relay rtp-nte sip-notify sip-kpml - C. dial-peer voice 1 voip
translation-profile outgoing Strip9
max-conn 5
destination-pattern 91[2-9]..[2-9]......$
session protocol sipv2
session target ipv4:142.45.10.1
dtmf-relay rtp-nte sip-notify sip-kpml
codec aacld - D. dial-peer voice 1 voip
translation-profile outgoing Strip9
max-conn 5
destination-pattern 91[2-9]..[2-9]......$
session protocol sipv2
session target ipv4:142.45.10.1
dtmf-relay rtp-nte sip-notify sip-kpml
codec ilbc mode 20
Answer: D
Explanation:
Section: Call Control
NEW QUESTION # 19
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?
- A. SRST
- B. Device Pool
- C. Cisco Unified CM Group
- D. Route Group
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_overview.html
NEW QUESTION # 20
The enterprise network is migrating to a global dial plan and running a few devices in the test phase. Which change is performed by the system to the information dialed when the Cisco UCM endpoint dials an external destination under a global dial plan?
- A. The calling party is globalized using translation patterns
- B. The destination is globalized using translation patterns to normalize the called party
- C. The normalization script modifies the calling party
- D. The destination is transformed using site-specific route patterns
Answer: B
NEW QUESTION # 21 
Refer to the exhibit. Given this "debug isdn q921" output, what is the problem with the PRI?
- A. Nothing, the PRI is sending keepalives.
- B. PRI does not have an IP address configured on the interface.
- C. Layer 1 is down on the controller.
- D. Layer 2 is down on the controller.
Answer: D
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
NEW QUESTION # 22
Which filed id configured to change the caller ID information on a SIP route pattern?
- A. Route partition
- B. Connected Line ID Presentation
- C. Called party Transformation Mask
- D. Calling party transformation Mask
Answer: D
NEW QUESTION # 23
An engineer must manually register an analog port with cisco UCM using the MGCP protocol.
Which commands are required?
mgcp
- A. mgcp call-agent 172.16.1.252
ccm-manager config server 172.16.1.252
ccm-manager config
ccm-manager mgcp
!
dial-peer voice 1 pots
port 1/0/0
shut
no shut
!
mgcp - B. ccm-manager config server 172.16.1.252
ccm-manager config
!
dial-peer voice 1 pots
application MGCPAPP
port 1/0/0
! - C. mgcp call-agent 172.16.1.252
ccm-manager config server 172.16.1.252
ccm-manager config
ccm-manager mgcp
!
dial-peer voice 1 pots
port 1/0/0
shut
no shut
!
mgcp - D. mgcp call-agent 172.16.1.252
ccm-manager config server 172.16.1.252
ccm-manager config
ccm-manager mgcp
! d
ial-peer voice 1 pots
application MGCPAPP
port 1/0/0
shut
no shut
!
no mgcp
Answer: D
NEW QUESTION # 24
Endpoint A is attempting to call endpoint B.
Endpoint A only supports G.711ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw. Which two media are resources are allocated to normalize packetization rates through transrating?
- A. Software MTP on Cisco Unified Communication Manager
- B. Hardware transcoder on Cisco IOS Software
- C. Hardware MTP on Cisco IOS Software
- D. Software transcoder on Cisco unified Communications manager
- E. Software MTP on Cisco IOS Software
Answer: A,C
NEW QUESTION # 25
Calls are being delivered to the end user in the globalized format. Where does an engineer configure the calling number into a localized format?
- A. route pattern
- B. service parameters
- C. gateway
- D. IP phone
Answer: D
NEW QUESTION # 26
What are two reasons that AF41 is marked for the audio and video channels of a video call? (Choose two.)
- A. to give video calls a higher priority than AP41 in the QoS policy
- B. to provide separate classes for audio calls and video calls
- C. to allow high-definition quality calls over low-speed links
- D. to preserve lip synchronization between the audio and video channels
- E. to prioritize video over other high -priority traffic classes
Answer: B,D
NEW QUESTION # 27
A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronized User in Cisco UCM. Which step is next to remove this user from Cisco UCM?
- A. Delete the user directly from Cisco UCM.
- B. Execute a manual sync to refresh the local database and delete the end user.
- C. Restart the Dirsync service after the user is deleted from LDAP directory.
- D. Wait 24 hours for the garbage collector to remove the user.
Answer: D
NEW QUESTION # 28
An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user. Which type of provisioning can be configured on the endpoint?
- A. CUBE
- B. Edge
- C. CMS
- D. CUC
Answer: B
NEW QUESTION # 29
Which destination does cisco UCM use DNS to resolve fully qualified domain names to IP addresses?
- A. primary TFTP server for option 150
- B. application server name
- C. Cisco UCM Name
- D. SIP trunk
Answer: D
NEW QUESTION # 30
An engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 Pattern be configured?
- A. 192.168.1.3
- B. \[email protected]
- C. ciscocm1.jupiter.com
- D. [email protected]
Answer: C
NEW QUESTION # 31
A user reports transfer failures from an IP phone for calls received from a PSTN to another PSTN number.
What is a reason for these failures?
- A. The service parameter related to Offnet to Offnet call Transfer is set to TRUE.
- B. The IP phone is configured with the Wrong region.
- C. The gateway is configured with the wrong device pool.
- D. The incoming calling search space of the SIP trunk does not include the partition of the line in the IP phone.
Answer: A
NEW QUESTION # 32
A high-speed network is often configured with a five-class QoS model. Which classes are used in the model?
- A. call-signaling, real-time, critical data, best-effort, and drop-class
- B. real-time, signaling, critical data, best-effort, and drop-class
- C. real-time, call-signaling, critical data, best-effort, and scavenger
- D. voice, video, signaling critical data, and best-effort
Answer: C
Explanation:
https://www.cisco.com/en/US/technologies/tk543/tk759/technologies_white_paper0900aecd8029
5a9b.pdf
NEW QUESTION # 33
Refer to the exhibit. A call is failing to establish between two SIP Devices. The Called device answer with this SDP.
Which SDP parameter causes this issue?
- A. The RTP port is set to 0.
- B. The payload for G.711ulaw must be 18.
- C. The media stream is set to sendonly.
- D. The calling device did not offer a ptime value.
Answer: A
Explanation:
The format of media announcement is as follows.
m=<media> <port> <transport> <fmt list>
The first sub-field is the media type. Currently defined media for TMedia is "audio".
The second sub-field is the transport port to which the media stream will be sent. In Smart Media we don't specify it in Profile SDP Description and therefore you should insert "0".
NEW QUESTION # 34
A company's employees have been complaining that they have been unable to select options on the internal IVR of the help desk IT support has been given Cisco UCM traces and below is the snippet of the SDP of the INVITE packet.
How is this issue resolved?
- A. Configure CODEC for G 722
- B. Configure CODEC for G.729
- C. Configure DTMF for RFC 2833.
- D. Configure DTMF for KPML
Answer: D
NEW QUESTION # 35
Which Cisco UCM configuration is required for SIP MWI integrations?
- A. Select "Redirecting Diversion Header Delivery - Inbound" on the SIP trunk.
- B. Enable "Accept presence subscription" on the SIP Trunk Security Profile.
- C. Select "Redirecting Diversion Header Delivery - Outbound" on the SIP trunk.
- D. Enable "Accept unsolicited notification" on the SIP Trunk Security Profile.
Answer: D
NEW QUESTION # 36
An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit has received to its previous version. What must the administrator do to prevent this from happening again?
- A. Set the prepare cluster for rollback to pre-8-0 enterprise parameter to true.
- B. Confirm the phone load name in the phone configuration.
- C. Assign a universal device template to the phone.
- D. Assign a phone security profile with secure SIP.
Answer: B
NEW QUESTION # 37
Refer to the exhibit. An administrator accesses the terminal of a Cisco UCM and starts a packet capture. Which two commands must the administrator use on Cisco UCM to generate DNS traffic? (Choose two.)
- A. show cdp neighbor
- B. utils diagnose lest
- C. utils diagnose module validate_network
- D. utils ntp status
- E. show version active
Answer: B,C
NEW QUESTION # 38
Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?
- A. SIP trunk/Route list, description, and IPv4 pattern
- B. pattern usage, IPv6 pattern, and SIP trunk/Route list
- C. pattern usage, IPv4 pattern, and SIP trunk/Route list
- D. pattern usage, IPv4 pattern, IPv6 pattern, and description
Answer: C
Explanation:
Section: Call Control
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/ CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-
100_chapter_0100111.pdf
NEW QUESTION # 39
What are the predefined call handlers in Cisco Unity Connection?
- A. greetings, operator, and closed
- B. opening greeting, welcome, and default system
- C. caller input, greetings, and transfer
- D. opening greeting, operator, and goodbye
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/voice_ip_comm/connection/1x/administration/guide/acm030.ht ml
NEW QUESTION # 40
Refer to the exhibit.
This INVITE is sent to an endpoint that only supports G.729. what must be done for this call to succeed?
- A. ADD a media termination point that supports G.711ulaw and G.729.
- B. Add a transcoder that supports G.711ualw and G.729.
- C. Noting; both sides support G.729.
- D. Nothing; both sides support payload type.101.
Answer: B
NEW QUESTION # 41
......
Use Free 350-801 Exam Questions that Stimulates Actual EXAM : https://www.torrentexam.com/350-801-exam-latest-torrent.html
Get 100% Real 350-801 Free Online Practice Test: https://drive.google.com/open?id=19IC25caS-TybSmbPlFvy3qXnfl6Ugseo
