The Best Valid 350-801 Dumps for Helping Passing 350-801 Exam!
UPDATED Cisco 350-801 Exam Questions & Answer
Cisco 350-801 exam is designed for IT professionals who want to validate their skills in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam tests the candidates' knowledge of the latest Cisco technologies and solutions related to collaboration, including voice and video infrastructure, call control, messaging, and collaboration endpoints. 350-801 exam is designed to measure the candidates' ability to design, configure, and troubleshoot Cisco collaboration solutions.
Preparing for the Cisco 350-801 certification exam requires a solid understanding of Cisco Collaboration solutions and hands-on experience in implementing and operating these solutions. Candidates can use Cisco's official study materials, such as Cisco Press books, e-learning courses, and practice exams, to prepare for the exam. Additionally, candidates can join Cisco's Learning Partner Program to receive instructor-led training and access to lab environments to gain practical experience.
Cisco 350-801 exam is challenging and requires extensive preparation. The candidates are recommended to have practical experience in implementing and operating Cisco collaboration solutions before taking the exam. The candidates can prepare for the exam by taking instructor-led or self-paced training courses offered by Cisco, reading Cisco documentation, or using practice exams and study materials available online.
NEW QUESTION # 196
Refer to the exhibit.
An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device(config)# mgcp enable
- B. Device (config) # com-manager active
- C. Device (config)# mgcp
- D. Device(config)# ccm-manager enable
Answer: C
NEW QUESTION # 197
Which wildcard must an engineer configure to match a whole domain in SIP route patterns?
- A. *
@
!
. - B. !: The ! symbol is used to negate a character class.
- C. @: The @ symbol is used to separate the user name from the domain name in an email address.
- D. .: The . symbol is used to match any single character.
Answer: A
Explanation:
The asterisk (*) wildcard is used to match any sequence of characters, including an empty sequence. Therefore, it can be used to match any domain name in a SIP Route Pattern.
The other options are not correct because:
NEW QUESTION # 198
Which datastore and protocol is used for saving back-up files within the Disaster Recovery System of Cisco UCM?
- A. remote disk on an NFS share
- B. remote disk on a CIFS share
- C. local disk on the Cisco UCM server
- D. remote disk on the SFTP server
Answer: D
Explanation:
https://www.learncisco.net/courses/cucm-basics/serviceability-backup-and-restore/backing-up- and-restoring-cucm.html
NEW QUESTION # 199 
Refer to the exhibit. The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is not matched because DNIS does not end with a "$".
- B. The translation rule is not matched because DNIS contains "-".
- C. The translation rule is matched and the translated number is 025553431234.
- D. The translation rule is matched and the translated number is 02553431234.
Answer: B
Explanation:
Section: Call Control
NEW QUESTION # 200
Refer to the exhibit. Unanswered calls do not reach the voicemail associated with the phones Instead, callers receive the default greeting.
Which action fixes the configuration?
- A. Reboot Cisco Unity Connection
- B. Review the conversation manager logs on Cisco Unity Connection
- C. Check the box "Redirecting Diversion Header Delivery - Outbound", then reset the trunk
- D. Check the box "Redirecting Diversion Header Delivery - Outbound"
Answer: C
NEW QUESTION # 201
An administrator troubleshoots call flows and suspects that there are issues with the dial plan.
Which tool enables a quick analysis of the dial plan and provides call flows of dialed digits?
- A. Dialed Number Analyzer
- B. Dial Plan Analyzer
- C. Cisco Dial Plan Analyzer
- D. Digit Analysis Analyzer
Answer: A
NEW QUESTION # 202
Which version is used to provide encryption for SNMP management traffic in collaboration deployments?
- A. SNMPv2
- B. SNMPv2c
- C. SNMPv1
- D. SNMPv3
Answer: D
Explanation:
Section: Infrastructure and Design
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/configuration/xe-16/snmp-xe-16-book/nm-snmp- encrypt-snmp-support.html
NEW QUESTION # 203
What is the element of Cisco collaboration infrastructure that allows Jabber clients outside of the network to register in Cisco Unified communications Manager and use its resources?
- A. Cisco Unified Border Element
- B. Cisco prime collaboration provisioning server
- C. Cisco IM and Presence node
- D. Cisco Expressway
Answer: D
NEW QUESTION # 204
Refer to the exhibit.
The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is not matched because DNIS does not end with a "$".
- B. The translation rule is matched and the translated number is 025553431234.
- C. The translation rule is matched and the translated number is 02553431234.
- D. The translation rule is not matched because DNIS contains "-".
Answer: C
NEW QUESTION # 205
An engineer configures a new phone in Cisco UCM The phone boots and gets IP when it connects to the network, however the phone fails to register With CISCO UCM, The engineer observes that the phone has a status Rejected In CISCO UCM What must be verified first 'Mien troubleshooting the issue?
- A. whether the Initial Trust List and Certificate Trust List files on the phone are correct
- B. whether auto-registration is enabled in Cisco UCM
- C. whether the phone ts in the correct VLAN
- D. whether the phone's MAC address is correct In Cisco UCM
Answer: B
Explanation:
b) whether the Initial Trust List and Certificate Trust List files on the phone are correct is not the first thing to verify, but it may be a possible cause of the issue if the phone has an ITL file from another cluster that prevents it from registering with Cisco UCM2. To resolve this issue, the ITL file needs to be deleted from the phone or exchanged between the clusters2.
c) whether the phone is in the correct VLAN is not the first thing to verify, but it may be a possible cause of the issue if the phone is not in the same VLAN as the Cisco UCM server or cannot reach it due to network issues3. To resolve this issue, the network connectivity and VLAN configuration need to be checked and fixed3.
d) whether the phone's MAC address is correct in Cisco UCM is not the first thing to verify, but it may be a possible cause of the issue if the phone's MAC address does not match the one configured in Cisco UCM. To resolve this issue, the MAC address needs to be corrected and updated in Cisco UCM.
Explanation:
This is the first thing that must be verified when troubleshooting the issue of phone status showing rejected in Cisco UCM1. Auto-registration allows new phones to register with Cisco UCM without manual configuration1. If auto-registration is disabled, the phone will not be able to register and will show a rejected status1.
The other options are not the first things that must be verified when troubleshooting the issue:
NEW QUESTION # 206
Which two configuration elements are part of the Cisco Unified Communications Manager toll-fraud prevention? (Choose two.)
- A. Calling search space
- B. SIP trunk security profile.
- C. Feature control policy
- D. SUBSCRIBE calling search space
- E. Partition
Answer: A,E
NEW QUESTION # 207
How many minutes does it take for automatic fallback to occur in a Presence Redundancy Group if the primary node lost a critical service?
- A. 5 min
- B. 10 min
- C. 30 min
- D. 60 min
Answer: C
NEW QUESTION # 208
An engineer troubleshoots outbound can failure on an ISDN-PRI circuit. The engineer ts suspecting the 'Incomplete Destination". Which debugs or commands are run in the voice gateway to troubleshoot the issue?
- A. debug voip ecapi inout
show controller ti - B. debug isdn q921
debug voip ecapi inout - C. debug isdn q921
term mon - D. debug isdn q931
show isdn status
Answer: D
Explanation:
The engineer should run the following debugs or commands in the voice gateway to troubleshoot the issue:
debug isdn q931 - This debug will show the ISDN Q.931 messages that are being exchanged between the voice gateway and the ISDN switch. This can be used to identify the cause of the "Incomplete Destination" error.
show isdn status - This command will show the status of the ISDN PRI circuit. This can be used to verify that the circuit is up and running.
The other options are not correct. The debug isdn q921 command will show the ISDN Q.921 messages that are being exchanged between the voice gateway and the ISDN switch. This is not necessary for troubleshooting the issue. The term mon command will show the terminal monitor output. This is not necessary for troubleshooting the issue. The debug voip ecapi inout command will show the VoIP ECAP messages that are being exchanged between the voice gateway and the VoIP server. This is not necessary for troubleshooting the issue. The show controller ti command will show the status of the T1 controller. This is not necessary for troubleshooting the issue.
NEW QUESTION # 209
An administrator installs a new Cisco Telepresence video endpoint and receives this error: "AOR is not permitted by Allow/Deny list." Which action should be taken to resolve this problem?
- A. Reboot the VCS server and attempt reregistration.
- B. Change the SIP trunk configuration.
- C. Correct the restriction policy settings.
- D. Upload a new policy In VCS.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/articles/vcs_endpoint_registrati on_problems_kb_460.html
NEW QUESTION # 210
A customer has Cisco Unity Connection that is integrated with LDAP. As a unity connection administrator, you have received a request to change the first for VM user. Where must the change be performed?
- A. Cisco unity connection
- B. Cisco IM and presence
- C. Cisco Unified Communications Manager end user
- D. Active directory
Answer: D
NEW QUESTION # 211
Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?
- A. The engineer must activate the controller card on the voice gateway before configuring the device.
- B. The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.
- C. The engineer used a T1 interface but must use an E1 interface.
- D. The engineer must manually revert the order of using the channels.
Answer: A
NEW QUESTION # 212
When a remote office location is set up with limited bandwidth resources, which codec would allow the most voice calls with the limited bandwidth?
- A. G.711
- B. G.723
- C. G.722
- D. G.729
Answer: D
Explanation:
Section: Protocols, Codecs, and Endpoints
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/media.html
NEW QUESTION # 213
Which Cisco Unified communications manager configuration is required for SIP MWI integration?
- A. Select "Redirecting Diversion Header Delivery- Inbound' on the SIP trunk
- B. Enable "Accept unsolicited notification" on the SIP Trunk security profile
- C. Enable "Accept presence subscription" on the SIP trunk security profile
- D. Select "Redirecting Diversion Header Delivery - outbound" on the SIP trunk
Answer: B
NEW QUESTION # 214
Which three parameters are requested in an Audit Endpoint message from a Cisco Unified CM to an endpoint on a MGCP gateway? (Choose three.)
- A. Connection ID
- B. Observed Events
- C. Connection Mode
- D. Request Identifier
- E. Connection Parameters
- F. Bearer Information
- G. Call ID
- H. Capabilities
Answer: A,D,H
NEW QUESTION # 215
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider. Which set of commands allows the engineer to complete the task without compromising voice quality?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: B
NEW QUESTION # 216
Which two functions are provided by Cisco Expressway series? (Choose two.)
- A. intercluster extension mobility
- B. endpoint registration
- C. interworking of SIP and H.323
- D. voice and video transcoding
- E. voice and video conferencing
Answer: B,C
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-
11/Cisco-Meeting-Server-2-4-with-Cisco-Expressway-Deployment-Guide_X8-11-4.pdf
NEW QUESTION # 217
......
Updated 350-801 Dumps Questions For Cisco Exam: https://www.torrentexam.com/350-801-exam-latest-torrent.html
Latest Success Metrics For Actual 350-801 Exam Realistic Dumps: https://drive.google.com/open?id=1qcMbrIfV6QjLokO2BdxCY0Oj-vUbbi3T
