Free F5 201 Exam 2023 Practice Materials Collection
201 Exam Info and Free Practice Test All-in-One Exam Guide Apr-2023
NEW QUESTION # 138
A site would like to ensure that a given web server's default page is being served correctly prior to sending it client traffic. They assigned the A site would like to ensure that a given web server's default page is being served correctly prior to sending it client traffic. They.e assigned the default HTTP monitor to the pool. What would the member status be if it sent an unexpected response to the GET request. default HTTP monitor to the pool. What would the member. status be if it sent an unexpected response to the GET request.
- A. The pool member would be marked offline (red).
- B. The pool member would alternate between red and green.
- C. The pool member would be marked unknown (blue).
- D. The pool member would be marked online (green).
Answer: D
NEW QUESTION # 139
The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B. Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection?
- A. 10.10.20.3:80
- B. 10.10.20.2:80
- C. 10.10.20.4:80
- D. 10.10.20.1:80
- E. 10.10.20.5:80
Answer: D
NEW QUESTION # 140
The BIG-IP Administrator creates a custom iRule that fails to work as expected. Which F5 online resource should the administrator use to help resolve this issue?
- A. University
- B. Bug Tracker
- C. DevCentral
- D. Health
Answer: C
NEW QUESTION # 141
A site has assigned the ICMP
monitor to all nodes and a custom monitor, based on the HTTP template,
to a pool of web
servers. The HTTPElbased monitor
is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member. 5 nodes. All other settings are default. What is the status of the pool members.
- A. All pool members are down since the ICMPElbased monitor is failing in some cases.
- B. The pool members whose nodes are failing the ICMPElbased monitor will be marked disabled.
- C. All pool members are up since the HTTPElbased monitor is successful.
- D. The pool members whose nodes are failing the ICMPElbased monitor will be marked unavailable.
Answer: D
NEW QUESTION # 142
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?
- A. The BIG-IP Administrator is logged in as root
- B. The BIG-IP Administrator is logged in as administrator
- C. The BIG-IP Administrator is on the Standby Device
- D. The BIG-IP Administrator is NOT logged into command line to tail over
Answer: C
NEW QUESTION # 143
Refer to the exhibit.
An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?
- A. The pool associated with the virtual server is falling its health check.
- B. The virtual address does not have ARP enabled.
- C. The pool associated with the virtual server does not have priority group activation enabled.
- D. The virtual address does not have route advertising enabled.
Answer: B
NEW QUESTION # 144
A configuration change is made on the standby member of a device group.
What is displayed as "Recommended Action" on the Device Management Overview screen?
- A. Force active member of device group to standby
- B. Synchronize the standby member configuration to the group
- C. Activate device with the most recent configuration
- D. Synchronize the active member configuration to the group.
Answer: B
NEW QUESTION # 145
When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?
- A. The first system to be updated will assume the Active role.
- B. Synching should not be performed.
- C. This is not possible since both systems are updated simultaneously.
- D. The older system will issue SNMP traps indicating a communication error with the partner.
Answer: B
NEW QUESTION # 146
A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?
- A. Allow SNAT
- B. Slow Ramp Time
- C. Availability Requirement
- D. Action On Service Down
Answer: B
Explanation:
Option ABC is a global configuration, has nothing to do with the new pool member, select D after excluding
NEW QUESTION # 147
An application is configured so that the same pool member must be used for an entire session, as well as for HTTP and FTP traffic.
A user reports that a session has terminated, and the user must restart the session. The BIG-IP Administrator determines that the active BIG-IP device failed over to the standby BIG-IP device. Which configuration settings should the BIG-IP Administrator verify to ensure proper behaviour when BIG-IP failover occurs?
- A. Persistence mirroring and Match Across Services
- B. syn-cookie insertion threshold and connection low-water mark
- C. cookie persistence and session timeout
- D. Stateful failover and Network Failover detection
Answer: A
NEW QUESTION # 148
Which type of Virtual Server requires the use of a FastL4 profile?
- A. Standard
- B. Performance (HTTP)
- C. Stateless
- D. Performance (Layer 4)
Answer: D
NEW QUESTION # 149
The current status of a given pool member is nknown. Which condition could explain that state. The current status of a given pool member is .nknown. Which condition could explain that state.
- A. The member has a monitor assigned to it and the most recent monitor was successful.
- B. The member's node has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- C. The member has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- D. The member has no monitor assigned to it.
Answer: D
NEW QUESTION # 150
A site has six members in a pool. Three of the servers are new and have more memory and a faster processor than the others. Assuming all other factors are equal and traffic should be sent to all members, which two loadElbalancing methods are most appropriate. (Choose two.)
- A. Round Robin
- B. Priority
- C. Observed
- D. Ratio
Answer: C,D
NEW QUESTION # 151
The BIG-IP Administrator needs to perform a BIG-IP device upgrade to the latest version of TMOS. Where can the administrator obtain F5 documentation on upgrade requirements?
- A. Network > Interfaces
- B. Local Traffic > Pools
- C. iHealth
- D. Local Traffic > Virtual Servers
- E. AsKFS
Answer: B
NEW QUESTION # 152
Which parameters are set to the same value when a pair of BIG-IP devices are synchronized?
- A. host names
- B. VLAN failsafe settings
- C. MAC masquerade addresses
- D. profile definitions
- E. system clocks
Answer: D
NEW QUESTION # 153
Where is the loadbalancing mode specified?
- A. within the pool member definition
- B. within the node definition
- C. within the virtual server definition
- D. within the pool definition
Answer: D
NEW QUESTION # 154
A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an Interface to it. Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B.
What should the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?
- A. Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.
- B. Configure a Default Route for the new VLAN on Cluster Member A.
- C. Enable the Interface that is attached to the new VLAN on Cluster Member A.
- D. Configure the new VLAN manually on Cluster Member B.
Answer: D
NEW QUESTION # 155
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIGElIP processes such packets.
- A. The destination address would not change, but the source address would be translated to the origin address.
- B. The source address would not change, but the destination address would be translated to the NAT's address.
- C. The destination address would not change, but the source address would be translated to the NAT's address.
- D. The source address would not change, but the destination address would be translated to the origin address.
Answer: D
NEW QUESTION # 156
......
Understanding of functional and technical aspects of Troubleshooting basic performance issues
The following will be discussed in this section:
- Recognize when a packet capture is needed within the context of a performance issue
- Use BIG-IP tools in order to identify potential performance issues
- Establish the frequency of a given issue (random, continuous, isolated, intermittent, repetitive intervals)
- Understand how to get performance statistics in addition to the those shown in the dashboard (Overview - Performance)
- Differentiate between performance issue types (i.e. Latency, Congestion, broken content)
The F5 201 (BIG-IP Administrator) Exam is a certification exam that is designed to test the skills and knowledge of individuals who administer F5 BIG-IP products. This exam is a great way for IT professionals to demonstrate their expertise in managing and maintaining F5 BIG-IP systems. The exam covers a wide range of topics, including network architecture, security, application delivery, and management.
Pass F5 201 Actual Free Exam Q&As Updated Dump: https://www.torrentexam.com/201-exam-latest-torrent.html
Latest 201 Actual Free Exam Updated 255 Questions: https://drive.google.com/open?id=1rXQUr_iO8dA9ehgfO8-SkFNRH6bi-dei
