JN0-636 Dumps Free Test Engine Player Verified Updated [Jan 18, 2023]
Q&As with Explanations Verified & Correct Answers
NEW QUESTION 48
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights.
What would you use to assist your SRX series devices to accomplish this task?
- A. JIMS
- B. JATP Appliance
- C. JSA
- D. Junos Space
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure-jims.html
NEW QUESTION 49
Exhibit
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 50
Exhibit
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 51
You are asked to deploy filter-based forwarding on your SRX Series device for incoming traffic sourced from the 10.10 100 0/24 network in this scenario, which three statements are correct? (Choose three.)
- A. You must create and apply a firewall filter that matches on the source address 10.10.100.0/24 and then sends this traffic to your routing
- B. You must create and apply a firewall filter that matches on the destination address 10 10.100.0/24 and then sends this traffic to your routing instance.
- C. You must create a forwarding-type routing instance.
- D. You must create a VRF-type routing instance.
- E. You must create a RIB group that adds interface routes to your routing instance.
Answer: A,B,D
NEW QUESTION 52
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"? (Choose two.)
- A. SAK is not generated using this key.
- B. CAK is not used for encryption and decryption of the MACsec session.
- C. CAK is used for encryption and decryption of the MACsec session.
- D. SAK is successfully generated using this key.
Answer: A,C
NEW QUESTION 53
Exhibit
Referring to the exhibit, which type of NAT is being performed?
- A. Persistent NAT
- B. Static NAT
- C. Source NAT
- D. Destination NAT
Answer: C
NEW QUESTION 54
What is the purpose of the Switch Microservice of Policy Enforcer?
- A. to isolate infected hosts
- B. to enroll SRX Series devices with Juniper ATP Cloud
- C. to inspect traffic for malware
- D. to synchronize security policies to SRX Series devices
Answer: B
NEW QUESTION 55
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The session information indicates that the IPsec tunnel has not been established
- B. The remote gateway address for the IPsec tunnel is 10.20.20.2
- C. NAT is being used to change the source address of outgoing packets
- D. The local gateway address for the IPsec tunnel is 10.20.20.2
Answer: B
NEW QUESTION 56
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The session information indicates that the IPsec tunnel has not been established
- B. The remote gateway address for the IPsec tunnel is 10.20.20.2
- C. NAT is being used to change the source address of outgoing packets
- D. The local gateway address for the IPsec tunnel is 10.20.20.2
Answer: B
NEW QUESTION 57
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?
- A. The number of traffic selectors configured for the VPN.
- B. The number of CoS queues configured for the VPN.
- C. The number of forwarding classes configured for the VPN.
- D. The number of classifiers configured for the VPN.
Answer: A
NEW QUESTION 58
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/ref/statement/family-ethernet-switching-edit-interfaces-qfx-series.html#statement-name-statement__d26608e73
NEW QUESTION 59
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"?
(Choose two.)
- A. SAK is not generated using this key.
- B. CAK is not used for encryption and decryption of the MACsec session.
- C. CAK is used for encryption and decryption of the MACsec session.
- D. SAK is successfully generated using this key.
Answer: A,C
NEW QUESTION 60
Exhibit
You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1.
You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem.
- A. Change the IKE proposal-set to compatible on the branch1 and corporate devices.
- B. Change the IKE mode to aggressive on the branch1 and corporate devices.
- C. Add multipoint to the st0.0 interface configuration on the branch1 device.
- D. Change the local identity to inet advpn on the branch1 device.
Answer: D
NEW QUESTION 61
Exhibit
You configure a traceoptions file called radius on your returns the output shown in the exhibit What is the source of the problem?
- A. The authentication order is misconfigured.
- B. The RADIUS server suffered a hardware failure.
- C. The RADIUS server IP address is unreachable.
- D. An incorrect password is being used.
Answer: B
NEW QUESTION 62
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. Full mesh IPsec VPNs with tunnels between all sites.
- B. An IPsec group VPN with the corporate firewall acting as the hub device.
- C. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- D. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
Answer: B
Explanation:
https://www.juniper.net/us/en/local/pdf/app-notes/3500202-en.pdf
NEW QUESTION 63
......
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
Verified JN0-636 dumps Q&As Latest JN0-636 Download: https://www.torrentexam.com/JN0-636-exam-latest-torrent.html
JN0-636 Dumps with Free 365 Days Update Fast Exam Updates: https://drive.google.com/open?id=1C2qAHABMC2FLpAv80c9svQVnRZpCRKjO
