Ultimate Guide to Prepare JN0-636 Certification Exam for JNCIP-SEC in 2023
Use Real JN0-636 Dumps - Juniper Correct Answers updated on 2023
NEW QUESTION 26
Exhibit
You configure a traceoptions file called radius on your returns the output shown in the exhibit What is the source of the problem?
- A. The RADIUS server IP address is unreachable.
- B. The authentication order is misconfigured.
- C. An incorrect password is being used.
- D. The RADIUS server suffered a hardware failure.
Answer: D
NEW QUESTION 27
Exhibit
Referring to the exhibit, which type of NAT is being performed?
- A. Destination NAT
- B. Persistent NAT
- C. Source NAT
- D. Static NAT
Answer: C
NEW QUESTION 28
Exhibit
Referring to the exhibit, an internal host is sending traffic to an Internet host using the 203.0.113.1 reflexive address with source port 54311.
Which statement is correct in this situation?
- A. Only the Internet host that the internal host originally communicated with can initiate traffic to reach the internal host using the 203.0.113.1 address, source port 54311, and a random destination port.
- B. Any host on the Internet can initiate traffic to reach the internal host using the 203.0.113.1 address, a random source port, and destination port54311.
- C. Only the Internet host that the internal host originally communicated with can initiate traffic to reach the internal host using the 203.0 113.1 address, a random source port, and destination port 54311.
- D. Any host on the Internet can initiate traffic to reach the internal host using the 203.0.113.1 address, source port 54311, and a random destination port.
Answer: D
NEW QUESTION 29
Exhibit
You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
- A. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
- B. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
- C. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
- D. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
Answer: B
NEW QUESTION 30
You are asked to allocate security profile resources to the interconnect logical system for it to work properly.
In this scenario, which statement is correct?
- A. The NAT resources must be defined in the security profile for the interconnect logical system.
- B. The flow-session resource must be defined in the security profile for the interconnect logical system.
- C. The resources must be calculated based on the amount of traffic that will flow between the logical systems.
- D. No resources are needed to be allocated to the interconnect logical system.
Answer: C
NEW QUESTION 31
You are connecting two remote sites to your corporate headquarters site.You must ensure that all traffic is secured and sent directly between sites In this scenario, which VPN should be used?
- A. Layer 2 VPN
- B. full mesh Layer 3 VPN with EBGP
- C. IPsec ADVPN
- D. hub-and-spoke IPsec VPN
Answer: D
NEW QUESTION 32
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS can use security flow resources up to the system maximum.
- B. The c-1 TSYS has no reservation for the security flow resource.
- C. The c-1 TSYS cannot use any security flow resources.
- D. The c-1 TSYS has a reservation for the security flow resource.
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html
NEW QUESTION 33
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet's destination is to an interface on the SRX Series device.
- B. The packet is dropped before making an SSH connection.
- C. The packet's destination is to a server in the DMZ zone.
- D. The packet originated within the Trust zone.
- E. The packet is allowed to make an SSH connection.
Answer: A,B,D
NEW QUESTION 34
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.
- B. You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.
- C. You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.
- D. The SRX-1 device can use the Proxy__Nodes feed in another security policy.
Answer: A,D
NEW QUESTION 35
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"? (Choose two.)
- A. SAK is not generated using this key.
- B. CAK is not used for encryption and decryption of the MACsec session.
- C. SAK is successfully generated using this key.
- D. CAK is used for encryption and decryption of the MACsec session.
Answer: A,D
NEW QUESTION 36
Exhibit
Which statement is true about the output shown in the exhibit?
- A. The SRX Series device is configured with packet-based IPv6 forwarding options.
- B. The SRX Series device is configured with default security forwarding options.
- C. The SRX Series device is configured with flow-based IPv6 forwarding options.
- D. The SRX Series device is configured to disable IPv6 packet forwarding.
Answer: B
NEW QUESTION 37
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- B. Juniper Networks will investigate false positives generated by this custom feed.
- C. Juniper Networks will not investigate false positives generated by this custom feed.
- D. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
Answer: C,D
Explanation:
https://www.juniper.net/documentation/en_US/junos-space18.1/policy-enforcer/topics/task/configuration/junos-space-policyenforcer-custom-feeds-infected-host-configure.html
NEW QUESTION 38
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal?
(Choose two.)
- A. Configure Juniper ATP Cloud as the identity provider (IdP).
- B. Configure Microsoft Azure as the identity provider (IdP).
- C. Configure Juniper ATP Cloud as the service provider (SP).
- D. Configure Microsoft Azure as the service provider (SP).
Answer: B,D
NEW QUESTION 39
What is the purpose of the Switch Microservice of Policy Enforcer?
- A. to synchronize security policies to SRX Series devices
- B. to isolate infected hosts
- C. to inspect traffic for malware
- D. to enroll SRX Series devices with Juniper ATP Cloud
Answer: D
NEW QUESTION 40
Your Source NAT implementation uses an address pool that contains multiple IPv4 addresses Your users report that when they establish more than one session with an external application, they are prompted to authenticate multiple times External hosts must not be able to establish sessions with internal network hosts What will solve this problem?
- A. Disable PAT.
- B. Enable address persistence.
- C. Enable persistent NAT
- D. Enable destination NAT.
Answer: C
NEW QUESTION 41
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. External hosts cannot initiate contact.
- B. The configured solution allows IPv4 to IPv6 translation.
- C. The configured solution allows IPv6 to IPv4 translation.
- D. The IPv6 address is invalid.
Answer: C,D
NEW QUESTION 42
Exhibit
Referring to the exhibit, which type of NAT is being performed?
- A. Destination NAT
- B. Persistent NAT
- C. Source NAT
- D. Static NAT
Answer: C
NEW QUESTION 43
Exhibit
- A. Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.
- B. Immediate response required: Wipe infected endpoint hosts.
- C. Immediate response required: Block malware IP addresses (download server or CnC server)
- D. The highlighted incident (arrow) shown in the exhibit shows a progression level of "Download" in the kill chain.
What are two appropriate mitigation actions for the selected incident? (Choose two.) - E. Not an urgent action: Use IVP to confirm if machine is infected.
Answer: A,C
NEW QUESTION 44
......
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
JNCIP-SEC -JN0-636 Exam-Practice-Dumps: https://www.torrentexam.com/JN0-636-exam-latest-torrent.html
JN0-636 Premium Files Test pdf - Free Dumps Collection: https://drive.google.com/open?id=12Xm1UWvNV6rsYl-j2wIb6Z2tAFleDyKM
